@@ -687,6 +687,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
{
struct opp_table *opp_table;
unsigned long freq, old_freq;
+ int (*set_opp)(struct dev_pm_set_opp_data *data);
struct dev_pm_opp *old_opp, *opp;
struct regulator **regulators;
struct dev_pm_set_opp_data *data;
@@ -751,6 +752,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
return _generic_set_opp_clk_only(dev, clk, old_freq, freq);
}
+ if (opp_table->set_opp)
+ set_opp = opp_table->set_opp;
+ else
+ set_opp = _generic_set_opp;
+
data = opp_table->set_opp_data;
data->regulators = regulators;
data->regulator_count = opp_table->regulator_count;
@@ -769,7 +775,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
rcu_read_unlock();
- return _generic_set_opp(data);
+ return set_opp(data);
}
EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate);
@@ -903,6 +909,9 @@ static void _remove_opp_table(struct opp_table *opp_table)
if (opp_table->regulators)
return;
+ if (opp_table->set_opp)
+ return;
+
/* Release clk */
if (!IS_ERR(opp_table->clk))
clk_put(opp_table->clk);
@@ -1570,6 +1579,109 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
/**
+ * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper
+ * @dev: Device for which the helper is getting registered.
+ * @set_opp: Custom set OPP helper.
+ *
+ * This is useful to support complex platforms (like platforms with multiple
+ * regulators per device), instead of the generic OPP set rate helper.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_register_set_opp_helper(struct device *dev,
+ int (*set_opp)(struct dev_pm_set_opp_data *data))
+{
+ struct opp_table *opp_table;
+ int ret;
+
+ if (!set_opp)
+ return -EINVAL;
+
+ mutex_lock(&opp_table_lock);
+
+ opp_table = _add_opp_table(dev);
+ if (!opp_table) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ /* This should be called before OPPs are initialized */
+ if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+ ret = -EBUSY;
+ goto err;
+ }
+
+ /* Already have custom set_opp helper */
+ if (WARN_ON(opp_table->set_opp)) {
+ ret = -EBUSY;
+ goto err;
+ }
+
+ opp_table->set_opp = set_opp;
+
+ mutex_unlock(&opp_table_lock);
+ return 0;
+
+err:
+ _remove_opp_table(opp_table);
+unlock:
+ mutex_unlock(&opp_table_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_register_set_opp_helper);
+
+/**
+ * dev_pm_opp_register_put_opp_helper() - Releases resources blocked for
+ * set_opp helper
+ * @dev: Device for which custom set_opp helper has to be cleared.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_register_put_opp_helper(struct device *dev)
+{
+ struct opp_table *opp_table;
+
+ mutex_lock(&opp_table_lock);
+
+ /* Check for existing table for 'dev' first */
+ opp_table = _find_opp_table(dev);
+ if (IS_ERR(opp_table)) {
+ dev_err(dev, "Failed to find opp_table: %ld\n",
+ PTR_ERR(opp_table));
+ goto unlock;
+ }
+
+ if (!opp_table->set_opp) {
+ dev_err(dev, "%s: Doesn't have custom set_opp helper set\n",
+ __func__);
+ goto unlock;
+ }
+
+ /* Make sure there are no concurrent readers while updating opp_table */
+ WARN_ON(!list_empty(&opp_table->opp_list));
+
+ opp_table->set_opp = NULL;
+
+ /* Try freeing opp_table if this was the last blocking resource */
+ _remove_opp_table(opp_table);
+
+unlock:
+ mutex_unlock(&opp_table_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_register_put_opp_helper);
+
+/**
* dev_pm_opp_add() - Add an OPP table from a table definitions
* @dev: device for which we do this operation
* @freq: Frequency in Hz for this OPP
@@ -141,6 +141,7 @@ enum opp_table_access {
* @clk: Device's clock handle
* @regulators: Supply regulators
* @regulator_count: Number of power supply regulators
+ * @set_opp: Platform specific set_opp callback
* @set_opp_data: Data to be passed to set_opp callback
* @dentry: debugfs dentry pointer of the real device directory (not links).
* @dentry_name: Name of the real dentry.
@@ -179,6 +180,7 @@ struct opp_table {
struct regulator **regulators;
unsigned int regulator_count;
+ int (*set_opp)(struct dev_pm_set_opp_data *data);
struct dev_pm_set_opp_data *set_opp_data;
#ifdef CONFIG_DEBUG_FS
@@ -116,6 +116,8 @@ int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
void dev_pm_opp_put_prop_name(struct device *dev);
struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
void dev_pm_opp_put_regulators(struct opp_table *opp_table);
+int dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
+void dev_pm_opp_register_put_opp_helper(struct device *dev);
int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask);
int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
@@ -215,6 +217,14 @@ static inline int dev_pm_opp_set_supported_hw(struct device *dev,
static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
+static inline int dev_pm_opp_register_set_opp_helper(struct device *dev,
+ int (*set_opp)(struct dev_pm_set_opp_data *data))
+{
+ return -ENOTSUPP;
+}
+
+static inline void dev_pm_opp_register_put_opp_helper(struct device *dev) {}
+
static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
{
return -ENOTSUPP;