diff mbox

[V7,10/10] PM / OPP: Don't assume platform doesn't have regulators

Message ID 6f174b5d2fd2d09332fbc80f074d67c48be63ac7.1480564564.git.viresh.kumar@linaro.org
State Superseded
Headers show

Commit Message

Viresh Kumar Dec. 1, 2016, 10:58 a.m. UTC 
If the regulators aren't set explicitly by the platform, the OPP core
assumes that the platform doesn't have any regulator and uses the
clk-only callback.

If the platform failed to register a regulator with the core, then this
can turn out to be a dangerous assumption as the OPP core will try to
change clk without changing regulators.

Handle that properly by making sure that the DT didn't have any entries
for supply voltages as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

---
 drivers/base/power/opp/core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

-- 
2.7.1.410.g6faf27b

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 35ff06283738..a0e6294baf1d 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -748,7 +748,20 @@  int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Only frequency scaling */
 	if (!regulators) {
+		unsigned long u_volt = opp->supplies[0].u_volt;
+
 		rcu_read_unlock();
+
+		/*
+		 * DT contained supply ratings? Consider platform failed to set
+		 * regulators.
+		 */
+		if (unlikely(u_volt)) {
+			dev_err(dev, "%s: Regulator not registered with OPP core\n",
+				__func__);
+			return -EINVAL;
+		}
+
 		return _generic_set_opp_clk_only(dev, clk, old_freq, freq);
 	}