diff mbox series

[v1] arm64: dts: exynos: update all samsung,mode constants

Message ID 20250209132043.3906127-1-ivo.ivanov.ivanov1@gmail.com
State New
Headers show
Series [v1] arm64: dts: exynos: update all samsung,mode constants | expand

Commit Message

Ivaylo Ivanov Feb. 9, 2025, 1:20 p.m. UTC 
Update all samsung,mode property values to account for renaming USI_V2
constants to USI_MODE in the bindings.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
Patch picked from [1] and rebased on linux-next

[1] https://lore.kernel.org/all/20250204172803.3425496-1-ivo.ivanov.ivanov1@gmail.com/
---
 arch/arm64/boot/dts/exynos/exynos850.dtsi     | 14 +++---
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi  | 48 +++++++++----------
 .../arm64/boot/dts/exynos/exynosautov920.dtsi |  2 +-
 .../dts/exynos/google/gs101-pixel-common.dtsi |  4 +-
 arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  2 +-
 5 files changed, 35 insertions(+), 35 deletions(-)

Comments

Rob Herring (Arm) Feb. 10, 2025, 4:22 p.m. UTC | #1 
On Sun, 09 Feb 2025 15:20:43 +0200, Ivaylo Ivanov wrote:
> Update all samsung,mode property values to account for renaming USI_V2
> constants to USI_MODE in the bindings.
> 
> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> ---
> Patch picked from [1] and rebased on linux-next
> 
> [1] https://lore.kernel.org/all/20250204172803.3425496-1-ivo.ivanov.ivanov1@gmail.com/
> ---
>  arch/arm64/boot/dts/exynos/exynos850.dtsi     | 14 +++---
>  arch/arm64/boot/dts/exynos/exynosautov9.dtsi  | 48 +++++++++----------
>  .../arm64/boot/dts/exynos/exynosautov920.dtsi |  2 +-
>  .../dts/exynos/google/gs101-pixel-common.dtsi |  4 +-
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  2 +-
>  5 files changed, 35 insertions(+), 35 deletions(-)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/exynos/' for 20250209132043.3906127-1-ivo.ivanov.ivanov1@gmail.com:

Error: arch/arm64/boot/dts/exynos/exynos850.dtsi:654.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynos850-e850-96.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynos850-e850-96.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynos850-e850-96.dtb] Error 2
Error: arch/arm64/boot/dts/exynos/exynosautov920.dtsi:309.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynosautov920-sadk.dtb] Error 2
Error: arch/arm64/boot/dts/exynos/exynosautov9.dtsi:445.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/exynosautov9-sadk.dtb] Error 1
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/exynosautov9-sadk.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/exynosautov9-sadk.dtb] Error 2
Error: arch/arm64/boot/dts/exynos/google/gs101.dtsi:828.20-21 syntax error
FATAL ERROR: Unable to parse input tree
make[4]: *** [scripts/Makefile.dtbs:131: arch/arm64/boot/dts/exynos/google/gs101-oriole.dtb] Error 1
make[3]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos/google] Error 2
make[3]: Target 'arch/arm64/boot/dts/exynos/google/gs101-oriole.dtb' not remade because of errors.
make[2]: *** [scripts/Makefile.build:465: arch/arm64/boot/dts/exynos] Error 2
make[2]: Target 'arch/arm64/boot/dts/exynos/google/gs101-oriole.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1464: exynos/google/gs101-oriole.dtb] Error 2
make: *** [Makefile:251: __sub-make] Error 2
make: Target 'exynos/exynos8895-dreamlte.dtb' not remade because of errors.
make: Target 'exynos/exynos850-e850-96.dtb' not remade because of errors.
make: Target 'exynos/exynos7885-jackpotlte.dtb' not remade because of errors.
make: Target 'exynos/exynos990-x1slte.dtb' not remade because of errors.
make: Target 'exynos/exynos5433-tm2.dtb' not remade because of errors.
make: Target 'exynos/exynos990-r8s.dtb' not remade because of errors.
make: Target 'exynos/exynos7-espresso.dtb' not remade because of errors.
make: Target 'exynos/google/gs101-oriole.dtb' not remade because of errors.
make: Target 'exynos/exynosautov920-sadk.dtb' not remade because of errors.
make: Target 'exynos/exynosautov9-sadk.dtb' not remade because of errors.
make: Target 'exynos/exynos990-c1s.dtb' not remade because of errors.
make: Target 'exynos/exynos9810-starlte.dtb' not remade because of errors.
make: Target 'exynos/exynos990-x1s.dtb' not remade because of errors.
make: Target 'exynos/exynos5433-tm2e.dtb' not remade because of errors.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index f1c8b4613..cb55015c8 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -651,7 +651,7 @@  usi_uart: usi@138200c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138200c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -677,7 +677,7 @@  usi_hsi2c_0: usi@138a00c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138a00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1020>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -706,7 +706,7 @@  usi_hsi2c_1: usi@138b00c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138b00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1030>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -735,7 +735,7 @@  usi_hsi2c_2: usi@138c00c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138c00c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1040>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -764,7 +764,7 @@  usi_spi_0: usi@139400c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x139400c0 0x20>;
 			samsung,sysreg = <&sysreg_peri 0x1050>;
-			samsung,mode = <USI_V2_SPI>;
+			samsung,mode = <USI_MODE_SPI>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -796,7 +796,7 @@  usi_cmgp0: usi@11d000c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d000c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2000>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -855,7 +855,7 @@  usi_cmgp1: usi@11d200c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x11d200c0 0x20>;
 			samsung,sysreg = <&sysreg_cmgp 0x2010>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b36292a7d..66628cb32 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -442,7 +442,7 @@  usi_0: usi@103000c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103000c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -505,7 +505,7 @@  usi_i2c_0: usi@103100c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103100c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -534,7 +534,7 @@  usi_1: usi@103200c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103200c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -597,7 +597,7 @@  usi_i2c_1: usi@103300c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103300c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -626,7 +626,7 @@  usi_2: usi@103400c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103400c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -689,7 +689,7 @@  usi_i2c_2: usi@103500c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103500c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -718,7 +718,7 @@  usi_3: usi@103600c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103600c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -781,7 +781,7 @@  usi_i2c_3: usi@103700c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103700c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -810,7 +810,7 @@  usi_4: usi@103800c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -873,7 +873,7 @@  usi_i2c_4: usi@103900c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103900c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -902,7 +902,7 @@  usi_5: usi@103a00c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -965,7 +965,7 @@  usi_i2c_5: usi@103b00c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x103b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -994,7 +994,7 @@  usi_6: usi@109000c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109000c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1057,7 +1057,7 @@  usi_i2c_6: usi@109100c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109100c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1004>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1086,7 +1086,7 @@  usi_7: usi@109200c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109200c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1008>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1149,7 +1149,7 @@  usi_i2c_7: usi@109300c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109300c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x100c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1178,7 +1178,7 @@  usi_8: usi@109400c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109400c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1010>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1241,7 +1241,7 @@  usi_i2c_8: usi@109500c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109500c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1014>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1270,7 +1270,7 @@  usi_9: usi@109600c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109600c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1018>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1333,7 +1333,7 @@  usi_i2c_9: usi@109700c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109700c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x101c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1362,7 +1362,7 @@  usi_10: usi@109800c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109800c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1425,7 +1425,7 @@  usi_i2c_10: usi@109900c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109900c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1024>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1454,7 +1454,7 @@  usi_11: usi@109a00c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109a00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x1028>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1515,7 +1515,7 @@  usi_i2c_11: usi@109b00c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x109b00c0 0x20>;
 			samsung,sysreg = <&syscon_peric1 0x102c>;
-			samsung,mode = <USI_V2_I2C>;
+			samsung,mode = <USI_MODE_I2C>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
index eb446cdc4..00bd18fa7 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -306,7 +306,7 @@  usi_0: usi@108800c0 {
 				     "samsung,exynos850-usi";
 			reg = <0x108800c0 0x20>;
 			samsung,sysreg = <&syscon_peric0 0x1000>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
index b25230495..d6ddcc13f 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi
@@ -279,12 +279,12 @@  &usi_uart {
 };
 
 &usi8 {
-	samsung,mode = <USI_V2_I2C>;
+	samsung,mode = <USI_MODE_I2C>;
 	status = "okay";
 };
 
 &usi12 {
-	samsung,mode = <USI_V2_I2C>;
+	samsung,mode = <USI_MODE_I2C>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 813f96089..daa50eaa2 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -825,7 +825,7 @@  usi_uart: usi@10a000c0 {
 				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			samsung,sysreg = <&sysreg_peric0 0x1020>;
-			samsung,mode = <USI_V2_UART>;
+			samsung,mode = <USI_MODE_UART>;
 			status = "disabled";
 
 			serial_0: serial@10a00000 {