diff mbox series

[v3,1/8] dt-bindings: spi: Add STM32 OSPI controller

Message ID 20250210131826.220318-2-patrice.chotard@foss.st.com
State New
Headers show
Series [v3,1/8] dt-bindings: spi: Add STM32 OSPI controller | expand

Commit Message

Patrice CHOTARD Feb. 10, 2025, 1:18 p.m. UTC 
From: Patrice Chotard <patrice.chotard@foss.st.com>

Add device tree bindings for the STM32 OSPI controller.

Main features of the Octo-SPI controller :
  - support sNOR / sNAND / HyperRAM™ and HyperFlash™ devices.
  - Three functional modes: indirect, automatic-status polling,
    memory-mapped.
  - Up to 4 Gbytes of external memory can be addressed in indirect
    mode (per physical port and per CS), and up to 256 Mbytes in
    memory-mapped mode (combined for both physical ports and per CS).
  - Single-, dual-, quad-, and octal-SPI communication.
  - Dual-quad communication.
  - Single data rate (SDR) and double transfer rate (DTR).
  - Maximum target frequency is 133 MHz for SDR and 133 MHz for DTR.
  - Data strobe support.
  - DMA channel for indirect mode.
  - Double CS mapping that allows two external flash devices to be
    addressed with a single OCTOSPI controller mapped on a single
    OCTOSPI port.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
 .../bindings/spi/st,stm32mp25-ospi.yaml       | 105 ++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml b/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
new file mode 100644
index 000000000000..5f276f27dc4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32mp25-ospi.yaml
@@ -0,0 +1,105 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32mp25-ospi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Octal Serial Peripheral Interface (OSPI)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-ospi
+
+  reg:
+    maxItems: 1
+
+  memory-region:
+    description:
+      Memory region to be used for memory-map read access.
+      In memory-mapped mode, read access are performed from the memory
+      device using the direct mapping.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: phandle to OSPI block reset
+      - description: phandle to delay block reset
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  st,syscfg-dlyb:
+    description: configure OCTOSPI delay block.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: phandle to syscfg
+      - description: register offset within syscfg
+
+  access-controllers:
+    description: phandle to the rifsc device to check access right
+      and in some cases, an additional phandle to the rcc device for
+      secure clock control.
+    items:
+      - description: phandle to bus controller
+      - description: phandle to clock controller
+    minItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - st,syscfg-dlyb
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    spi@40430000 {
+      compatible = "st,stm32mp25-ospi";
+      reg = <0x40430000 0x400>;
+      memory-region = <&mm_ospi1>;
+      interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&hpdma 2 0x62 0x00003121 0x0>,
+             <&hpdma 2 0x42 0x00003112 0x0>;
+      dma-names = "tx", "rx";
+      clocks = <&scmi_clk CK_SCMI_OSPI1>;
+      resets = <&scmi_reset RST_SCMI_OSPI1>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+      access-controllers = <&rifsc 74>;
+      power-domains = <&CLUSTER_PD>;
+      st,syscfg-dlyb = <&syscfg 0x1000>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-rx-bus-width = <4>;
+        spi-max-frequency = <108000000>;
+      };
+    };