diff mbox series

[v3,09/15] iio: resolver: ad2s1210: use gpiod_multi_set_value_cansleep

Message ID 20250210-gpio-set-array-helper-v3-9-d6a673674da8@baylibre.com
State New
Headers show
Series [v3,01/15] gpiolib: add gpiod_multi_set_value_cansleep() | expand

Commit Message

David Lechner Feb. 10, 2025, 10:33 p.m. UTC 
Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of
gpiod_set_array_value().

These are not called in an atomic context, so changing to the cansleep
variant is fine.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/iio/resolver/ad2s1210.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/resolver/ad2s1210.c b/drivers/iio/resolver/ad2s1210.c
index b681129a99b6cf399668bf01a1f5a15fbc4f95b8..7f18df790157f1e411fb70de193a49f0677c999f 100644
--- a/drivers/iio/resolver/ad2s1210.c
+++ b/drivers/iio/resolver/ad2s1210.c
@@ -182,8 +182,7 @@  static int ad2s1210_set_mode(struct ad2s1210_state *st, enum ad2s1210_mode mode)
 
 	bitmap[0] = mode;
 
-	return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info,
-				     bitmap);
+	return gpiod_multi_set_value_cansleep(gpios, bitmap);
 }
 
 /*
@@ -1473,10 +1472,7 @@  static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
 
 		bitmap[0] = st->resolution;
 
-		ret = gpiod_set_array_value(resolution_gpios->ndescs,
-					    resolution_gpios->desc,
-					    resolution_gpios->info,
-					    bitmap);
+		ret = gpiod_multi_set_value_cansleep(resolution_gpios, bitmap);
 		if (ret < 0)
 			return dev_err_probe(dev, ret,
 					     "failed to set resolution gpios\n");