diff mbox series

[v2] wifi: ath12k: avoid deadlock during regulatory update in ath12k_regd_update()

Message ID 20250212023829.3300-1-quic_bqiang@quicinc.com
State New
Headers show
Series [v2] wifi: ath12k: avoid deadlock during regulatory update in ath12k_regd_update() | expand

Commit Message

Baochen Qiang Feb. 12, 2025, 2:38 a.m. UTC 
From: Wen Gong <quic_wgong@quicinc.com>

Running this test in a loop it is easy to reproduce an rtnl deadlock:

iw reg set FI
ifconfig wlan0 down

What happens is that thread A (workqueue) tries to update the regulatory:

    try to acquire the rtnl_lock of ar->regd_update_work

    rtnl_lock
    ath12k_regd_update [ath12k]
    ath12k_regd_update_work [ath12k]
    process_one_work
    worker_thread
    kthread
    ret_from_fork

And thread B (ifconfig) tries to stop the interface:

    try to cancel_work_sync(&ar->regd_update_work) in ath12k_mac_op_stop().
    ifconfig  3109 [003]  2414.232506: probe:

    ath12k_mac_op_stop [ath12k]
    drv_stop [mac80211]
    ieee80211_do_stop [mac80211]
    ieee80211_stop [mac80211]

The sequence of deadlock is:

1. Thread B calls rtnl_lock().

2. Thread A starts to run and calls rtnl_lock() from within
   ath12k_regd_update_work(), then enters wait state because the lock is
   owned by thread B.

3. Thread B tries to call cancel_work_sync(&ar->regd_update_work), but
   thread A is in ath12k_regd_update_work() waiting for rtnl_lock(). So
   cancel_work_sync() forever waits for ath12k_regd_update_work() to
   finish and we have a deadlock.

Change to use regulatory_set_wiphy_regd(), which is the asynchronous
version of regulatory_set_wiphy_regd_sync(). This way rtnl & wiphy locks
are not required so can be removed, and in the end the deadlock issue can
be avoided.

But a side effect introduced by the asynchronous regd update is that,
some essential information used in ath12k_reg_update_chan_list(), which
would be called later in ath12k_regd_update(), might has not been updated
by cfg80211, as a result wrong channel parameters sent to firmware.

To handle this side effect, move ath12k_reg_update_chan_list() to
ath12k_reg_notifier(), and advertise WIPHY_FLAG_NOTIFY_REGDOM_BY_DRIVER
to cfg80211. This works because, in the process of the asynchronous regd
update, after the new regd is processed, cfg80211 will notify ath12k by
calling ath12k_reg_notifier(). Since all essential information is updated
at that time, we are good to do channel list update.

Please note ath12k_reg_notifier() could also be called due to other
reasons, like core/beacon/user hints etc. For them we are not allowed to
call ath12k_reg_update_chan_list() because regd has not been updated.
This is done by verifying  the initiator.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
---
v2:
 - rebased on ToT
 - reformat commit text to make checkpatch happy
 - update copyright

 drivers/net/wireless/ath/ath12k/reg.c | 37 +++++++++++++++------------
 1 file changed, 21 insertions(+), 16 deletions(-)


base-commit: 704a2d7237043317ed1b0f8a08203e9ddde70097
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index 439d61f284d8..987fcca71504 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -1,7 +1,7 @@ 
 // SPDX-License-Identifier: BSD-3-Clause-Clear
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 #include <linux/rtnetlink.h>
 #include "core.h"
@@ -55,6 +55,24 @@  ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 	ath12k_dbg(ar->ab, ATH12K_DBG_REG,
 		   "Regulatory Notification received for %s\n", wiphy_name(wiphy));
 
+	if (request->initiator == NL80211_REGDOM_SET_BY_DRIVER) {
+		ath12k_dbg(ar->ab, ATH12K_DBG_REG,
+			   "driver initiated regd update\n");
+		if (ah->state != ATH12K_HW_STATE_ON)
+			return;
+
+		for_each_ar(ah, ar, i) {
+			ret = ath12k_reg_update_chan_list(ar);
+			if (ret) {
+				ath12k_warn(ar->ab,
+					    "failed to update chan list for pdev %u, ret %d\n",
+					    i, ret);
+				break;
+			}
+		}
+		return;
+	}
+
 	/* Currently supporting only General User Hints. Cell base user
 	 * hints to be handled later.
 	 * Hints from other sources like Core, Beacons are not expected for
@@ -211,7 +229,6 @@  int ath12k_regd_update(struct ath12k *ar, bool init)
 	struct ieee80211_regdomain *regd, *regd_copy = NULL;
 	int ret, regd_len, pdev_id;
 	struct ath12k_base *ab;
-	int i;
 
 	ab = ar->ab;
 
@@ -275,11 +292,7 @@  int ath12k_regd_update(struct ath12k *ar, bool init)
 		goto err;
 	}
 
-	rtnl_lock();
-	wiphy_lock(hw->wiphy);
-	ret = regulatory_set_wiphy_regd_sync(hw->wiphy, regd_copy);
-	wiphy_unlock(hw->wiphy);
-	rtnl_unlock();
+	ret = regulatory_set_wiphy_regd(hw->wiphy, regd_copy);
 
 	kfree(regd_copy);
 
@@ -290,15 +303,6 @@  int ath12k_regd_update(struct ath12k *ar, bool init)
 		goto skip;
 
 	ah->regd_updated = true;
-	/* Apply the new regd to all the radios, this is expected to be received only once
-	 * since we check for ah->regd_updated and allow here only once.
-	 */
-	for_each_ar(ah, ar, i) {
-		ab = ar->ab;
-		ret = ath12k_reg_update_chan_list(ar);
-		if (ret)
-			goto err;
-	}
 skip:
 	return 0;
 err:
@@ -770,6 +774,7 @@  void ath12k_regd_update_work(struct work_struct *work)
 void ath12k_reg_init(struct ieee80211_hw *hw)
 {
 	hw->wiphy->regulatory_flags = REGULATORY_WIPHY_SELF_MANAGED;
+	hw->wiphy->flags |= WIPHY_FLAG_NOTIFY_REGDOM_BY_DRIVER;
 	hw->wiphy->reg_notifier = ath12k_reg_notifier;
 }