diff mbox series

[v6,2/2] arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC

Message ID 20250213132328.4405-3-swathi.ks@samsung.com
State New
Headers show
Series arm64: dts: fsd: Add Ethernet support for FSD SoC | expand

Commit Message

Swathi K S Feb. 13, 2025, 1:23 p.m. UTC 
The FSD SoC contains two instances of Synopsys DWC QoS Ethernet IP, one in
FSYS0 block and other in PERIC block.
The ethernet interface is connected to a switch which is not managed by
Linux.

Adds device tree node for Ethernet in PERIC Block and enables the same for
FSD platform.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
---
This patch depends on the dt-binding patch
https://lore.kernel.org/netdev/20250213044624.37334-2-swathi.ks@samsung.com/

And the driver patch
https://lore.kernel.org/netdev/20250213044624.37334-3-swathi.ks@samsung.com/

 arch/arm64/boot/dts/tesla/fsd-evb.dts      |  9 ++++
 arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 56 ++++++++++++++++++++++
 arch/arm64/boot/dts/tesla/fsd.dtsi         | 28 +++++++++++
 3 files changed, 93 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
index cb977d0441a1..382f40322082 100644
--- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -73,6 +73,15 @@ 
 	};
 };
 
+&ethernet1 {
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
 &fin_pll {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
index cb437483ff6e..6f4658f57453 100644
--- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -437,6 +437,62 @@ 
 		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
 		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
 	};
+
+	eth1_tx_clk: eth1-tx-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_data: eth1-tx-data-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_tx_ctrl: eth1-tx-ctrl-pins {
+		samsung,pins = "gpf2-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_phy_intr: eth1-phy-intr-pins {
+		samsung,pins = "gpf2-6";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	eth1_rx_clk: eth1-rx-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_data: eth1-rx-data-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_rx_ctrl: eth1-rx-ctrl-pins {
+		samsung,pins = "gpf3-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV6>;
+	};
+
+	eth1_mdio: eth1-mdio-pins {
+		samsung,pins = "gpf3-6", "gpf3-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
 };
 
 &pinctrl_pmu {
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index c8311cfaeeb0..add456e0ca15 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -979,6 +979,34 @@ 
 			memory-region = <&mfc_left>;
 		};
 
+		ethernet1: ethernet@14300000 {
+			compatible = "tesla,fsd-ethqos";
+			reg = <0x0 0x14300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>,
+				 <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>,
+				 <&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>,
+				 <&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>,
+				 <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
+				 <&clock_peric PERIC_EQOS_PHYRXCLK>,
+				 <&clock_peric PERIC_DOUT_RGMII_CLK>;
+			clock-names = "ptp_ref", "master_bus", "slave_bus", "tx", "rx",
+				      "master2_bus", "slave2_bus", "eqos_rxclk_mux",
+				      "eqos_phyrxclk", "dout_peric_rgmii_clk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&eth1_tx_clk>, <&eth1_tx_data>, <&eth1_tx_ctrl>,
+				    <&eth1_phy_intr>, <&eth1_rx_clk>, <&eth1_rx_data>,
+				    <&eth1_rx_ctrl>, <&eth1_mdio>;
+			local-mac-address = [00 00 00 00 00 00];
+			iommus = <&smmu_peric 0x0 0x1>;
+			phy-mode = "rgmii-id";
+			status = "disabled";
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */