@@ -1445,6 +1445,17 @@ config GPIO_MADERA
help
Support for GPIOs on Cirrus Logic Madera class codecs.
+config GPIO_MAX7360
+ tristate "MAX7360 GPIO support"
+ depends on MFD_MAX7360
+ select GPIO_REGMAP
+ help
+ Allows to use MAX7360 I/O Expander PWM lines as GPIO and keypad COL
+ lines as GPO.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-max7360.
+
config GPIO_MAX77620
tristate "GPIO support for PMIC MAX77620 and MAX20024"
depends on MFD_MAX77620
@@ -100,6 +100,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
+obj-$(CONFIG_GPIO_MAX7360) += gpio-max7360.o
obj-$(CONFIG_GPIO_MAX77620) += gpio-max77620.o
obj-$(CONFIG_GPIO_MAX77650) += gpio-max77650.o
obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o
new file mode 100644
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2024 Bootlin
+ *
+ * Author: Kamel BOUHARA <kamel.bouhara@bootlin.com>
+ * Author: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max7360.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX7360_GPIO_PORT 1
+#define MAX7360_GPIO_COL 2
+
+static int max7360_gpo_reg_mask_xlate(struct gpio_regmap *gpio,
+ unsigned int base, unsigned int offset,
+ unsigned int *reg, unsigned int *mask)
+{
+ u16 ngpios = gpio_regmap_get_ngpio(gpio);
+
+ *reg = base;
+ *mask = BIT(MAX7360_MAX_KEY_COLS - (ngpios - offset));
+
+ return 0;
+}
+
+static int max7360_gpio_request(struct gpio_chip *gc, unsigned int pin)
+{
+ /*
+ * GPIOs on PORT pins are shared with the PWM and rotary encoder
+ * drivers: they have to be requested from the MFD driver.
+ */
+ return max7360_port_pin_request(gc->parent->parent, pin, true);
+}
+
+static void max7360_gpio_free(struct gpio_chip *gc, unsigned int pin)
+{
+ max7360_port_pin_request(gc->parent->parent, pin, false);
+}
+
+static int max7360_set_gpos_count(struct device *dev, struct regmap *regmap)
+{
+ /*
+ * MAX7360 COL0 to COL7 pins can be used either as keypad columns,
+ * general purpose output or a mix of both.
+ */
+ unsigned int val;
+ u32 columns;
+ u32 ngpios;
+ int ret;
+
+ ret = device_property_read_u32(dev, "ngpios", &ngpios);
+ if (ret < 0) {
+ dev_err(dev, "Missing ngpios OF property\n");
+ return ret;
+ }
+
+ /*
+ * Get the number of pins requested by the keypad and ensure our own pin
+ * count is compatible with it.
+ */
+ ret = device_property_read_u32(dev->parent, "keypad,num-columns", &columns);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read columns count\n");
+ return ret;
+ }
+
+ if (ngpios > MAX7360_MAX_GPO ||
+ (ngpios + columns > MAX7360_MAX_KEY_COLS)) {
+ dev_err(dev, "Incompatible gpos and columns count (%u, %u)\n",
+ ngpios, columns);
+ return -EINVAL;
+ }
+
+ /*
+ * MAX7360_REG_DEBOUNCE contains configuration both for keypad debounce
+ * timings and gpos/keypad columns repartition. Only the later is
+ * modified here.
+ */
+ val = FIELD_PREP(MAX7360_PORTS, ngpios);
+ ret = regmap_write_bits(regmap, MAX7360_REG_DEBOUNCE, MAX7360_PORTS, val);
+ if (ret) {
+ dev_err(dev, "Failed to write max7360 columns/gpos configuration");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct regmap_irq max7360_regmap_irqs[MAX7360_MAX_GPIO] = {
+ REGMAP_IRQ_REG(0, 0, BIT(0)),
+ REGMAP_IRQ_REG(1, 0, BIT(1)),
+ REGMAP_IRQ_REG(2, 0, BIT(2)),
+ REGMAP_IRQ_REG(3, 0, BIT(3)),
+ REGMAP_IRQ_REG(4, 0, BIT(4)),
+ REGMAP_IRQ_REG(5, 0, BIT(5)),
+ REGMAP_IRQ_REG(6, 0, BIT(6)),
+ REGMAP_IRQ_REG(7, 0, BIT(7)),
+};
+
+static int max7360_handle_mask_sync(const int index,
+ const unsigned int mask_buf_def,
+ const unsigned int mask_buf,
+ void *const irq_drv_data)
+{
+ struct regmap *regmap = irq_drv_data;
+ unsigned int val;
+
+ for (unsigned int i = 0; i < MAX7360_MAX_GPIO; ++i) {
+ val = (mask_buf & 1 << i) ? MAX7360_PORT_CFG_INTERRUPT_MASK : 0;
+ regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i),
+ MAX7360_PORT_CFG_INTERRUPT_MASK, val);
+ }
+
+ return 0;
+}
+
+static int max7360_gpio_probe(struct platform_device *pdev)
+{
+ struct regmap_irq_chip *irq_chip;
+ struct regmap_irq_chip_data *irq_chip_data;
+ struct gpio_regmap_config gpio_config = { };
+ struct device *dev = &pdev->dev;
+ unsigned long gpio_function;
+ struct regmap *regmap;
+ unsigned int outconf;
+ unsigned long flags;
+ int irq;
+ int ret;
+
+ regmap = dev_get_regmap(dev->parent, NULL);
+ if (!regmap)
+ return dev_err_probe(dev, -ENODEV, "could not get parent regmap\n");
+
+ gpio_function = (uintptr_t)device_get_match_data(dev);
+
+ if (gpio_function == MAX7360_GPIO_PORT &&
+ (device_property_read_bool(dev, "interrupt-controller"))) {
+ /*
+ * Port GPIOs with interrupt-controller property: add IRQ
+ * controller.
+ */
+ irq = fwnode_irq_get_byname(dev->parent->fwnode, "inti");
+ if (irq < 0)
+ return dev_err_probe(dev, irq, "Failed to get IRQ\n");
+
+ irq_chip = devm_kzalloc(dev, sizeof(*irq_chip), GFP_KERNEL);
+ if (!irq_chip)
+ return -ENOMEM;
+
+ irq_chip->name = dev_name(dev);
+ irq_chip->status_base = MAX7360_REG_GPIOIN;
+ irq_chip->num_regs = 1;
+ irq_chip->num_irqs = MAX7360_MAX_GPIO;
+ irq_chip->irqs = max7360_regmap_irqs;
+ irq_chip->handle_mask_sync = max7360_handle_mask_sync;
+ irq_chip->status_is_level = true;
+ irq_chip->irq_drv_data = regmap;
+
+ for (unsigned int i = 0; i < MAX7360_MAX_GPIO; i++) {
+ regmap_write_bits(regmap, MAX7360_REG_PWMCFG(i),
+ MAX7360_PORT_CFG_INTERRUPT_EDGES,
+ MAX7360_PORT_CFG_INTERRUPT_EDGES);
+ }
+
+ flags = IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED;
+ ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev), regmap, irq, flags, 0,
+ irq_chip, &irq_chip_data);
+ if (ret)
+ return dev_err_probe(dev, ret, "IRQ registration failed\n");
+
+ gpio_config.irq_domain = regmap_irq_get_domain(irq_chip_data);
+ }
+
+ if (gpio_function == MAX7360_GPIO_PORT) {
+ /*
+ * Port GPIOs: set output mode configuration (constant-current or not).
+ * This property is optional.
+ */
+ outconf = 0;
+ ret = device_property_read_u32(dev, "maxim,constant-current-disable", &outconf);
+ if (ret && (ret != -EINVAL))
+ return dev_err_probe(dev, -ENODEV,
+ "Failed to read maxim,constant-current-disable OF property\n");
+
+ regmap_write(regmap, MAX7360_REG_GPIOOUTM, outconf);
+ }
+
+ /* Add gpio device. */
+ gpio_config.parent = dev;
+ gpio_config.regmap = regmap;
+ if (gpio_function == MAX7360_GPIO_PORT) {
+ gpio_config.ngpio = MAX7360_MAX_GPIO;
+ gpio_config.reg_dat_base = GPIO_REGMAP_ADDR(MAX7360_REG_GPIOIN);
+ gpio_config.reg_set_base = GPIO_REGMAP_ADDR(MAX7360_REG_PWMBASE);
+ gpio_config.reg_dir_out_base = GPIO_REGMAP_ADDR(MAX7360_REG_GPIOCTRL);
+ gpio_config.ngpio_per_reg = MAX7360_MAX_GPIO;
+ gpio_config.request = max7360_gpio_request;
+ gpio_config.free = max7360_gpio_free;
+ } else {
+ u32 ngpios;
+
+ ret = device_property_read_u32(dev, "ngpios", &ngpios);
+ if (ret < 0) {
+ dev_err(dev, "Missing ngpios OF property\n");
+ return ret;
+ }
+
+ gpio_config.reg_set_base = GPIO_REGMAP_ADDR(MAX7360_REG_PORTS);
+ gpio_config.reg_mask_xlate = max7360_gpo_reg_mask_xlate;
+ gpio_config.ngpio = ngpios;
+
+ ret = max7360_set_gpos_count(dev, regmap);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to set GPOS pin count\n");
+ }
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config));
+}
+
+static const struct of_device_id max7360_gpio_of_match[] = {
+ {
+ .compatible = "maxim,max7360-gpo",
+ .data = (void *)MAX7360_GPIO_COL
+ }, {
+ .compatible = "maxim,max7360-gpio",
+ .data = (void *)MAX7360_GPIO_PORT
+ }, {
+ }
+};
+MODULE_DEVICE_TABLE(of, max7360_gpio_of_match);
+
+static struct platform_driver max7360_gpio_driver = {
+ .driver = {
+ .name = "max7360-gpio",
+ .of_match_table = max7360_gpio_of_match,
+ },
+ .probe = max7360_gpio_probe,
+};
+module_platform_driver(max7360_gpio_driver);
+
+MODULE_DESCRIPTION("MAX7360 GPIO driver");
+MODULE_AUTHOR("Kamel BOUHARA <kamel.bouhara@bootlin.com>");
+MODULE_AUTHOR("Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>");
+MODULE_LICENSE("GPL");