@@ -2917,10 +2917,13 @@ static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
}
static const struct sci_port_params *
-sci_probe_regmap(const struct plat_sci_port *cfg)
+sci_probe_regmap(const struct plat_sci_port *cfg, struct sci_port *sci_port)
{
unsigned int regtype;
+ sci_port->ops = &sci_port_ops;
+ sci_port->port.ops = &sci_uart_ops;
+
if (cfg->regtype != SCIx_PROBE_REGTYPE)
return &sci_port_params[cfg->regtype];
@@ -2967,9 +2970,7 @@ static int sci_init_single(struct platform_device *dev,
int ret;
sci_port->cfg = p;
- sci_port->ops = &sci_port_ops;
- port->ops = &sci_uart_ops;
port->iotype = UPIO_MEM;
port->line = index;
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SH_SCI_CONSOLE);
@@ -3009,7 +3010,6 @@ static int sci_init_single(struct platform_device *dev,
for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++)
sci_port->irqs[i] = sci_port->irqs[0];
- sci_port->params = sci_probe_regmap(p);
if (unlikely(sci_port->params == NULL))
return -EINVAL;
@@ -3264,9 +3264,14 @@ static void sci_remove(struct platform_device *dev)
device_remove_file(&dev->dev, &dev_attr_rx_fifo_timeout);
}
-#define SCI_OF_DATA(type, regtype) (void *)((type) << 16 | (regtype))
-#define SCI_OF_TYPE(data) ((unsigned long)(data) >> 16)
-#define SCI_OF_REGTYPE(data) ((unsigned long)(data) & 0xffff)
+#define SCI_OF_DATA(_type, _regtype) (\
+&(struct sci_of_data) {\
+ .type = (_type), \
+ .regtype = (_regtype),\
+ .ops = &sci_port_ops,\
+ .uart_ops = &sci_uart_ops,\
+ .params = &sci_port_params[_regtype],\
+})
static const struct of_device_id of_sci_match[] __maybe_unused = {
/* SoC-specific types */
@@ -3334,7 +3339,7 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
struct reset_control *rstc;
struct plat_sci_port *p;
struct sci_port *sp;
- const void *data;
+ const struct sci_of_data *data;
int id, ret;
if (!IS_ENABLED(CONFIG_OF) || !np)
@@ -3380,8 +3385,12 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
sp = &sci_ports[id];
*dev_id = id;
- p->type = SCI_OF_TYPE(data);
- p->regtype = SCI_OF_REGTYPE(data);
+ p->type = data->type;
+ p->regtype = data->regtype;
+
+ sp->ops = data->ops;
+ sp->port.ops = data->uart_ops;
+ sp->params = data->params;
sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts");
@@ -3471,6 +3480,7 @@ static int sci_probe(struct platform_device *dev)
}
dev_id = dev->id;
+ sp->params = sci_probe_regmap(p, &sci_ports[dev_id]);
}
sp = &sci_ports[dev_id];
@@ -3560,19 +3570,23 @@ sh_early_platform_init_buffer("earlyprintk", &sci_driver,
static struct plat_sci_port port_cfg __initdata;
int __init early_console_setup(struct earlycon_device *device,
- int type)
+ const struct sci_of_data *data)
{
const struct sci_common_regs *regs;
if (!device->port.membase)
return -ENODEV;
- device->port.type = type;
+ device->port.type = data->type;
memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port));
- port_cfg.type = type;
+
+ port_cfg.type = data->type;
+ port_cfg.regtype = data->regtype;
+
sci_ports[0].cfg = &port_cfg;
- sci_ports[0].ops = &sci_port_ops;
- sci_ports[0].params = sci_probe_regmap(&port_cfg);
+ sci_ports[0].params = data->params;
+ sci_ports[0].ops = data->ops;
+ sci_ports[0].port.ops = data->uart_ops;
regs = sci_ports[0].params->common_regs;
port_cfg.scscr = sci_ports[0].ops->read_reg(&sci_ports[0].port, regs->control);
@@ -3586,41 +3600,39 @@ int __init early_console_setup(struct earlycon_device *device,
static int __init sci_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- return early_console_setup(device, PORT_SCI);
+ return early_console_setup(device, SCI_OF_DATA(PORT_SCI, SCIx_SCI_REGTYPE));
}
static int __init scif_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- return early_console_setup(device, PORT_SCIF);
+ return early_console_setup(device, SCI_OF_DATA(PORT_SCIF, SCIx_SH4_SCIF_REGTYPE));
}
static int __init rzscifa_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- port_cfg.regtype = SCIx_RZ_SCIFA_REGTYPE;
- return early_console_setup(device, PORT_SCIF);
+ return early_console_setup(device, SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE));
}
static int __init rzv2hscif_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- port_cfg.regtype = SCIx_RZV2H_SCIF_REGTYPE;
- return early_console_setup(device, PORT_SCIF);
+ return early_console_setup(device, SCI_OF_DATA(PORT_SCIF, SCIx_RZV2H_SCIF_REGTYPE));
}
static int __init scifa_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- return early_console_setup(device, PORT_SCIFA);
+ return early_console_setup(device, SCI_OF_DATA(PORT_SCIFA, SCIx_SCIFA_REGTYPE));
}
static int __init scifb_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- return early_console_setup(device, PORT_SCIFB);
+ return early_console_setup(device, SCI_OF_DATA(PORT_SCIFB, SCIx_SCIFB_REGTYPE));
}
static int __init hscif_early_console_setup(struct earlycon_device *device,
const char *opt)
{
- return early_console_setup(device, PORT_HSCIF);
+ return early_console_setup(device, SCI_OF_DATA(PORT_HSCIF, SCIx_HSCIF_REGTYPE));
}
OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
@@ -96,6 +96,14 @@ struct sci_port_ops {
void (*prepare_console_write)(struct uart_port *port, u32 ctrl);
};
+struct sci_of_data {
+ const struct sci_port_params *params;
+ const struct uart_ops *uart_ops;
+ const struct sci_port_ops *ops;
+ unsigned short regtype;
+ unsigned short type;
+};
+
struct sci_port {
struct uart_port port;
@@ -165,7 +173,8 @@ void sci_flush_buffer(struct uart_port *port);
#define max_sr(_port) fls((_port)->sampling_rate_mask)
#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
-int __init early_console_setup(struct earlycon_device *device, int);
+int __init early_console_setup(struct earlycon_device *device,
+ const struct sci_of_data *data);
#endif
#endif /* __SH_SCI_COMMON_H__ */
The aim here is to provide an easier support to more different SCI controllers, like the RZ/T2H one. The existing .data field of_sci_match is changed to a structure containing all what that can be statically initialized, and avoid a call to 'sci_probe_regmap', in both 'sci_init_single', and 'early_console_setup'. 'sci_probe_regmap' is now assumed to be called in the only case where the device description is from a board file instead of a dts. In this way, there is no need to patch 'sci_probe_regmap' for adding new SCI type, and also, the specific sci_port_params for a new SCI type can be provided by an external file. Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com> --- drivers/tty/serial/sh-sci.c | 60 ++++++++++++++++++------------ drivers/tty/serial/sh-sci_common.h | 11 +++++- 2 files changed, 46 insertions(+), 25 deletions(-)