@@ -346,6 +346,22 @@ static int ps883x_retimer_probe(struct i2c_client *client)
goto err_vregs_disable;
}
+ /* skip resetting if already configured */
+ if (regmap_test_bits(retimer->regmap, REG_USB_PORT_CONN_STATUS_0,
+ CONN_STATUS_0_CONNECTION_PRESENT) == 1) {
+ gpiod_direction_output(retimer->reset_gpio, 0);
+ } else {
+ gpiod_direction_output(retimer->reset_gpio, 1);
+
+ /* VDD IO supply enable to reset release delay */
+ usleep_range(4000, 14000);
+
+ gpiod_set_value(retimer->reset_gpio, 0);
+
+ /* firmware initialization delay */
+ msleep(60);
+ }
+
sw_desc.drvdata = retimer;
sw_desc.fwnode = dev_fwnode(dev);
sw_desc.set = ps883x_sw_set;
@@ -368,21 +384,6 @@ static int ps883x_retimer_probe(struct i2c_client *client)
goto err_switch_unregister;
}
- /* skip resetting if already configured */
- if (regmap_test_bits(retimer->regmap, REG_USB_PORT_CONN_STATUS_0,
- CONN_STATUS_0_CONNECTION_PRESENT) == 1)
- return gpiod_direction_output(retimer->reset_gpio, 0);
-
- gpiod_direction_output(retimer->reset_gpio, 1);
-
- /* VDD IO supply enable to reset release delay */
- usleep_range(4000, 14000);
-
- gpiod_set_value(retimer->reset_gpio, 0);
-
- /* firmware initialization delay */
- msleep(60);
-
return 0;
err_switch_unregister:
Make sure that the retimer is fully setup before registering it to avoid having consumers try to access it while it is being reset. Fixes: 257a087c8b52 ("usb: typec: Add support for Parade PS8830 Type-C Retimer") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- drivers/usb/typec/mux/ps883x.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-)