diff mbox series

[v4,2/4] clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490

Message ID 20250220-lpass_qcm6490_resets-v4-2-68dbed85c485@quicinc.com
State New
Headers show
Series Update LPASS Audio clock driver for QCM6490 board | expand

Commit Message

Taniya Das Feb. 20, 2025, 4:22 a.m. UTC 
On the QCM6490 boards, the LPASS firmware controls the complete clock
controller functionalities and associated power domains. However, only
the LPASS resets required to be controlled by the high level OS. Thus,
add support for the resets in the clock driver to enable the Audio SW
driver to assert/deassert the audio resets as needed.

Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
---
 drivers/clk/qcom/lpassaudiocc-sc7280.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/lpassaudiocc-sc7280.c b/drivers/clk/qcom/lpassaudiocc-sc7280.c
index 45e7264770866f929a3f4663c477330f0bf7aa84..22169da08a51a01b8cd924c4844672c7cadc7d1a 100644
--- a/drivers/clk/qcom/lpassaudiocc-sc7280.c
+++ b/drivers/clk/qcom/lpassaudiocc-sc7280.c
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <linux/clk-provider.h>
@@ -713,14 +714,24 @@  static const struct qcom_reset_map lpass_audio_cc_sc7280_resets[] = {
 	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
 };
 
+static const struct regmap_config lpass_audio_cc_sc7280_reset_regmap_config = {
+	.name = "lpassaudio_cc_reset",
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.max_register = 0xc8,
+};
+
 static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
-	.config = &lpass_audio_cc_sc7280_regmap_config,
+	.config = &lpass_audio_cc_sc7280_reset_regmap_config,
 	.resets = lpass_audio_cc_sc7280_resets,
 	.num_resets = ARRAY_SIZE(lpass_audio_cc_sc7280_resets),
 };
 
 static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = {
-	{ .compatible = "qcom,sc7280-lpassaudiocc" },
+	{ .compatible = "qcom,qcm6490-lpassaudiocc", .data = &lpass_audio_cc_reset_sc7280_desc },
+	{ .compatible = "qcom,sc7280-lpassaudiocc", .data = &lpass_audio_cc_sc7280_desc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, lpass_audio_cc_sc7280_match_table);
@@ -752,13 +763,17 @@  static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	int ret;
 
+	desc = device_get_match_data(&pdev->dev);
+
+	if (of_device_is_compatible(pdev->dev.of_node, "qcom,qcm6490-lpassaudiocc"))
+		return qcom_cc_probe_by_index(pdev, 1, desc);
+
 	ret = lpass_audio_setup_runtime_pm(pdev);
 	if (ret)
 		return ret;
 
 	lpass_audio_cc_sc7280_regmap_config.name = "lpassaudio_cc";
 	lpass_audio_cc_sc7280_regmap_config.max_register = 0x2f000;
-	desc = &lpass_audio_cc_sc7280_desc;
 
 	regmap = qcom_cc_map(pdev, desc);
 	if (IS_ERR(regmap)) {
@@ -772,7 +787,7 @@  static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)
 	regmap_write(regmap, 0x4, 0x3b);
 	regmap_write(regmap, 0x8, 0xff05);
 
-	ret = qcom_cc_really_probe(&pdev->dev, &lpass_audio_cc_sc7280_desc, regmap);
+	ret = qcom_cc_really_probe(&pdev->dev, desc, regmap);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to register LPASS AUDIO CC clocks\n");
 		goto exit;