diff mbox series

[v2] Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO

Message ID 20250220215727.2035833-1-luiz.dentz@gmail.com
State New
Headers show
Series [v2] Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO | expand

Commit Message

Luiz Augusto von Dentz Feb. 20, 2025, 9:57 p.m. UTC 
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This enables buffer flow control for SCO/eSCO
(see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable),
recently this has caused the following problem and is actually a nice
addition for the likes of Socket TX complete:

< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
      Read Buffer Size (0x04|0x0005) ncmd 1
        Status: Success (0x00)
        ACL MTU: 1021 ACL max packet: 5
        SCO MTU: 240  SCO max packet: 8
...
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
> HCI Event: Hardware Error (0x10) plen 1
        Code: 0x0a

Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h      |  6 ++++++
 include/net/bluetooth/hci_core.h |  1 +
 net/bluetooth/hci_core.c         | 15 +++++++++++++++
 net/bluetooth/hci_sync.c         | 23 +++++++++++++++++++++++
 4 files changed, 45 insertions(+)
diff mbox series

Patch

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 0d51970d809f..a6a375cf97f9 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -432,6 +432,7 @@  enum {
 	HCI_WIDEBAND_SPEECH_ENABLED,
 	HCI_EVENT_FILTER_CONFIGURED,
 	HCI_PA_SYNC,
+	HCI_SCO_FLOWCTL,
 
 	HCI_DUT_MODE,
 	HCI_VENDOR_DIAG,
@@ -1528,6 +1529,11 @@  struct hci_rp_read_tx_power {
 	__s8     tx_power;
 } __packed;
 
+#define HCI_OP_WRITE_SYNC_FLOWCTL	0x0c2f
+struct hci_cp_write_sync_flowctl {
+	__u8     enable;
+} __packed;
+
 #define HCI_OP_READ_PAGE_SCAN_TYPE	0x0c46
 struct hci_rp_read_page_scan_type {
 	__u8     status;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index f756fac95488..6abe1115fa92 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1857,6 +1857,7 @@  void hci_conn_del_sysfs(struct hci_conn *conn);
 #define lmp_hold_capable(dev)      ((dev)->features[0][0] & LMP_HOLD)
 #define lmp_sniff_capable(dev)     ((dev)->features[0][0] & LMP_SNIFF)
 #define lmp_park_capable(dev)      ((dev)->features[0][1] & LMP_PARK)
+#define lmp_sco_capable(dev)       ((dev)->features[0][1] & LMP_SCO)
 #define lmp_inq_rssi_capable(dev)  ((dev)->features[0][3] & LMP_RSSI_INQ)
 #define lmp_esco_capable(dev)      ((dev)->features[0][3] & LMP_ESCO)
 #define lmp_bredr_capable(dev)     (!((dev)->features[0][4] & LMP_NO_BREDR))
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index e7ec12437c8b..a0a14fb8a496 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3564,11 +3564,19 @@  static void hci_sched_sco(struct hci_dev *hdev)
 			BT_DBG("skb %p len %d", skb, skb->len);
 			hci_send_frame(hdev, skb);
 
+
+			hdev->sco_cnt--;
 			conn->sent++;
 			if (conn->sent == ~0)
 				conn->sent = 0;
 		}
 	}
+
+	/* Restore sco_cnt if flow control has not been enabled as
+	 * HCI_EV_NUM_COMP_PKTS won't be generated.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_SCO_FLOWCTL))
+		hdev->sco_cnt = hdev->sco_pkts;
 }
 
 static void hci_sched_esco(struct hci_dev *hdev)
@@ -3588,11 +3596,18 @@  static void hci_sched_esco(struct hci_dev *hdev)
 			BT_DBG("skb %p len %d", skb, skb->len);
 			hci_send_frame(hdev, skb);
 
+			hdev->sco_cnt--;
 			conn->sent++;
 			if (conn->sent == ~0)
 				conn->sent = 0;
 		}
 	}
+
+	/* Restore sco_cnt if flow control has not been enabled as
+	 * HCI_EV_NUM_COMP_PKTS won't be generated.
+	 */
+	if (hci_dev_test_flag(hdev, HCI_SCO_FLOWCTL))
+		hdev->sco_cnt = hdev->sco_pkts;
 }
 
 static void hci_sched_acl_pkt(struct hci_dev *hdev)
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index dd770ef5ec36..42ee9c5e11ad 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3766,6 +3766,27 @@  static int hci_write_ca_timeout_sync(struct hci_dev *hdev)
 				     sizeof(param), &param, HCI_CMD_TIMEOUT);
 }
 
+/* Enable SCO flow control if supported */
+static int hci_write_sync_flowctl_sync(struct hci_dev *hdev)
+{
+	struct hci_cp_write_sync_flowctl cp;
+	int err;
+
+	/* Check if the controller supports SCO and HCI_OP_WRITE_SYNC_FLOWCTL */
+	if (!lmp_sco_capable(hdev) || !(hdev->commands[10] & BIT(4)))
+		return 0;
+
+	memset(&cp, 0, sizeof(cp));
+	cp.enable = 0x01;
+
+	err = __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SYNC_FLOWCTL,
+				    sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+	if (!err)
+		hci_dev_set_flag(hdev, HCI_SCO_FLOWCTL);
+
+	return err;
+}
+
 /* BR Controller init stage 2 command sequence */
 static const struct hci_init_stage br_init2[] = {
 	/* HCI_OP_READ_BUFFER_SIZE */
@@ -3784,6 +3805,8 @@  static const struct hci_init_stage br_init2[] = {
 	HCI_INIT(hci_clear_event_filter_sync),
 	/* HCI_OP_WRITE_CA_TIMEOUT */
 	HCI_INIT(hci_write_ca_timeout_sync),
+	/* HCI_OP_WRITE_SYNC_FLOWCTL */
+	HCI_INIT(hci_write_sync_flowctl_sync),
 	{}
 };