diff mbox series

[v2,3/3] i2c: i801: Improve too small kill wait time in i801_check_post

Message ID ad4ef645-5d03-4833-a0b6-f31f8fd06483@gmail.com
State New
Headers show
Series [v2,1/3] i2c: i801: Cosmetic improvements | expand

Commit Message

Heiner Kallweit Feb. 21, 2025, 8:30 p.m. UTC 
In my tests terminating a transaction took about 25ms, what is
in line with the chip-internal timeout as described in 5.21.3.2
"Bus Time Out" in [0]. Therefore the 2ms delay is too low.
Instead of a fixed delay let's use i801_wait_intr() here,
this also facilitates the status handling.

This potential issue seems to have been existing forever, but as no
related problem is known, treat it as an improvement.

[0] Intel document #326776-003, 7 Series PCH datasheet

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/i2c/busses/i2c-i801.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9097bb9cd..6a4147054 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -441,12 +441,11 @@  static int i801_check_post(struct i801_priv *priv, int status)
 	if (unlikely(status < 0)) {
 		/* try to stop the current command */
 		outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
-		usleep_range(1000, 2000);
+		status = i801_wait_intr(priv);
 		outb_p(0, SMBHSTCNT(priv));
 
 		/* Check if it worked */
-		status = inb_p(SMBHSTSTS(priv));
-		if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED))
+		if (status < 0 || !(status & SMBHSTSTS_FAILED))
 			pci_dbg(priv->pci_dev, "Failed terminating the transaction\n");
 		return -ETIMEDOUT;
 	}