@@ -1157,9 +1157,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
/*
* A lot of modern Clevo barebones have touchpad and/or keyboard issues
- * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
- * none of them have an external PS/2 port so this can safely be set for
- * all of them.
+ * after suspend fixable with the forcenorestore quirk.
* Clevo barebones come with board_vendor and/or system_vendor set to
* either the very generic string "Notebook" and/or a different value
* for each individual reseller. The only somewhat universal way to
@@ -1175,22 +1173,19 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
@@ -1250,8 +1245,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
@@ -1268,16 +1262,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/*
@@ -1288,8 +1280,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/*
@@ -1300,8 +1291,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
/*
@@ -1323,8 +1313,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"),
},
- .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
- SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
},
{
.matches = {
Some older Clevo barebones have problems like no or laggy keyboard after resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE quirk. We could not activly retest these devices because we no longer have them in our archive, but based on the other old Clevo barebones we tested where the new quirk had the same or a better behaviour I think it would be good to apply it on these too. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> --- drivers/input/serio/i8042-acpipnpio.h | 31 +++++++++------------------ 1 file changed, 10 insertions(+), 21 deletions(-)