@@ -4,6 +4,7 @@
* Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -31,7 +32,6 @@
#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0)
#define STATUS_GEN2_STATE_MASK GENMASK(6, 4)
-#define STATUS_GEN2_STATE_SHIFT 4
#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6)
#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
@@ -68,10 +68,18 @@ static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
#define DEFAULT_TEMP 37000
+struct qpnp_tm_chip;
+
+struct spmi_temp_alarm_data {
+ const long (*temp_map)[THRESH_COUNT][STAGE_COUNT];
+ int (*get_temp_stage)(struct qpnp_tm_chip *chip);
+};
+
struct qpnp_tm_chip {
struct regmap *map;
struct device *dev;
struct thermal_zone_device *tz_dev;
+ const struct spmi_temp_alarm_data *data;
unsigned int subtype;
unsigned int dig_revision;
long temp;
@@ -82,9 +90,9 @@ struct qpnp_tm_chip {
struct mutex lock;
bool initialized;
bool require_s2_shutdown;
+ long temp_thresh_map[STAGE_COUNT];
struct iio_channel *adc;
- const long (*temp_map)[THRESH_COUNT][STAGE_COUNT];
};
/* This array maps from GEN2 alarm state to GEN1 alarm stage */
@@ -118,18 +126,17 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
*/
static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
{
- if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 ||
- stage > STAGE_COUNT)
+ if (stage == 0 || stage > STAGE_COUNT)
return 0;
- return (*chip->temp_map)[chip->thresh][stage - 1];
+ return chip->temp_thresh_map[stage - 1];
}
/**
* qpnp_tm_get_temp_stage() - return over-temperature stage
* @chip: Pointer to the qpnp_tm chip
*
- * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
+ * Return: stage on success, or errno on failure.
*/
static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
{
@@ -140,12 +147,27 @@ static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
if (ret < 0)
return ret;
- if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
- ret = reg & STATUS_GEN1_STAGE_MASK;
- else
- ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
+ return FIELD_GET(STATUS_GEN1_STAGE_MASK, reg);
+}
- return ret;
+/**
+ * qpnp_tm_gen2_get_temp_stage() - return over-temperature stage
+ * @chip: Pointer to the qpnp_tm chip
+ *
+ * Return: stage on success, or errno on failure.
+ */
+static int qpnp_tm_gen2_get_temp_stage(struct qpnp_tm_chip *chip)
+{
+ u8 reg = 0;
+ int ret;
+
+ ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®);
+ if (ret < 0)
+ return ret;
+
+ ret = FIELD_GET(STATUS_GEN2_STATE_MASK, reg);
+
+ return alarm_state_map[ret];
}
/*
@@ -154,23 +176,16 @@ static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
*/
static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
{
- unsigned int stage, stage_new, stage_old;
+ unsigned int stage_new, stage_old;
int ret;
WARN_ON(!mutex_is_locked(&chip->lock));
- ret = qpnp_tm_get_temp_stage(chip);
+ ret = chip->data->get_temp_stage(chip);
if (ret < 0)
return ret;
- stage = ret;
-
- if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
- stage_new = stage;
- stage_old = chip->stage;
- } else {
- stage_new = alarm_state_map[stage];
- stage_old = alarm_state_map[chip->stage];
- }
+ stage_new = ret;
+ stage_old = chip->stage;
if (stage_new > stage_old) {
/* increasing stage, use lower bound */
@@ -182,7 +197,7 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
- TEMP_STAGE_HYSTERESIS;
}
- chip->stage = stage;
+ chip->stage = stage_new;
return 0;
}
@@ -222,8 +237,8 @@ static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp)
static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
int temp)
{
- long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
- long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
+ long stage2_threshold_min = (*chip->data->temp_map)[THRESH_MIN][1];
+ long stage2_threshold_max = (*chip->data->temp_map)[THRESH_MAX][1];
bool disable_s2_shutdown = false;
u8 reg;
@@ -258,6 +273,8 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
}
skip:
+ memcpy(chip->temp_thresh_map, chip->data->temp_map[chip->thresh],
+ sizeof(chip->temp_thresh_map));
reg |= chip->thresh;
if (disable_s2_shutdown && !chip->require_s2_shutdown)
reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
@@ -295,6 +312,21 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static const struct spmi_temp_alarm_data spmi_temp_alarm_data = {
+ .temp_map = &temp_map_gen1,
+ .get_temp_stage = qpnp_tm_get_temp_stage,
+};
+
+static const struct spmi_temp_alarm_data spmi_temp_alarm_gen2_data = {
+ .temp_map = &temp_map_gen1,
+ .get_temp_stage = qpnp_tm_gen2_get_temp_stage,
+};
+
+static const struct spmi_temp_alarm_data spmi_temp_alarm_gen2_rev1_data = {
+ .temp_map = &temp_map_gen2_v1,
+ .get_temp_stage = qpnp_tm_gen2_get_temp_stage,
+};
+
/*
* This function initializes the internal temp value based on only the
* current thermal stage and threshold. Setup threshold control and
@@ -302,7 +334,6 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
*/
static int qpnp_tm_init(struct qpnp_tm_chip *chip)
{
- unsigned int stage;
int ret;
u8 reg = 0;
int crit_temp;
@@ -316,16 +347,13 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
chip->temp = DEFAULT_TEMP;
- ret = qpnp_tm_get_temp_stage(chip);
+ ret = chip->data->get_temp_stage(chip);
if (ret < 0)
goto out;
chip->stage = ret;
- stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
- ? chip->stage : alarm_state_map[chip->stage];
-
- if (stage)
- chip->temp = qpnp_tm_decode_temp(chip, stage);
+ if (chip->stage)
+ chip->temp = qpnp_tm_decode_temp(chip, chip->stage);
mutex_unlock(&chip->lock);
@@ -439,10 +467,15 @@ static int qpnp_tm_probe(struct platform_device *pdev)
}
chip->subtype = subtype;
- if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
- chip->temp_map = &temp_map_gen2_v1;
+
+ if (subtype == QPNP_TM_SUBTYPE_GEN1)
+ chip->data = &spmi_temp_alarm_data;
+ else if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
+ chip->data = &spmi_temp_alarm_gen2_rev1_data;
+ else if (subtype == QPNP_TM_SUBTYPE_GEN2)
+ chip->data = &spmi_temp_alarm_gen2_data;
else
- chip->temp_map = &temp_map_gen1;
+ return -ENODEV;
/*
* Register the sensor before initializing the hardware to be able to
Currently multiple if/else statements are used in functions to decipher between SPMI temp alarm Gen 1, Gen 2 and Gen 2 Rev 1 functionality. Instead refactor the driver so that SPMI temp alarm chips will have reference to a spmi_temp_alarm_data struct which defines data and function callbacks based on the HW subtype. Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com> --- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 103 +++++++++++++------- 1 file changed, 68 insertions(+), 35 deletions(-)