@@ -52,8 +52,15 @@ properties:
reg:
maxItems: 1
+ qcom,calibration-variant:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ String to uniquely identify variant of the calibration data for designs
+ with colliding bus and device ids
+
qcom,ath12k-calibration-variant:
$ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
description:
String to uniquely identify variant of the calibration data for designs
with colliding bus and device ids
@@ -103,7 +110,7 @@ examples:
compatible = "pci17cb,1109";
reg = <0x0 0x0 0x0 0x0 0x0>;
- qcom,ath12k-calibration-variant = "RDP433_1";
+ qcom,calibration-variant = "RDP433_1";
ports {
#address-cells = <1>;
@@ -139,7 +146,7 @@ examples:
compatible = "pci17cb,1109";
reg = <0x0 0x0 0x0 0x0 0x0>;
- qcom,ath12k-calibration-variant = "RDP433_2";
+ qcom,calibration-variant = "RDP433_2";
qcom,wsi-controller;
ports {
@@ -176,7 +183,7 @@ examples:
compatible = "pci17cb,1109";
reg = <0x0 0x0 0x0 0x0 0x0>;
- qcom,ath12k-calibration-variant = "RDP433_3";
+ qcom,calibration-variant = "RDP433_3";
ports {
#address-cells = <1>;
Devicetree properties describing exactly the same thing should be reusable between device bindings. All Qualcomm Atheros WiFi chips needs certain calibration data, so properties should not be prefixed with device family (ath12k). Deprecate qcom,ath12k-calibration-variant and alike, so we gradually switch to a common property. This will also allow moving these properties to common schema, if desired. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)