| Message ID | 1337255655-10633-4-git-send-email-sachin.kamat@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
Sachin Kamat wrote: > > Adds S3C-HSOTG support to SMDKV210 board. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/mach-s5pv210/Kconfig | 2 ++ > arch/arm/mach-s5pv210/mach-smdkv210.c | 8 ++++++++ > 2 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig > index 88e983b..77185c3 100644 > --- a/arch/arm/mach-s5pv210/Kconfig > +++ b/arch/arm/mach-s5pv210/Kconfig > @@ -152,6 +152,7 @@ config MACH_SMDKV210 > select S3C_DEV_I2C1 > select S3C_DEV_I2C2 > select S3C_DEV_RTC > + select S3C_DEV_USB_HSOTG > select S3C_DEV_WDT > select S5P_DEV_FIMC0 > select S5P_DEV_FIMC1 > @@ -170,6 +171,7 @@ config MACH_SMDKV210 > select S5PV210_SETUP_IDE > select S5PV210_SETUP_KEYPAD > select S5PV210_SETUP_SDHCI > + select S5PV210_SETUP_USB_PHY > help > Machine support for Samsung SMDKV210 > > diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach- > s5pv210/mach-smdkv210.c > index 91d4ad8..0041045 100644 > --- a/arch/arm/mach-s5pv210/mach-smdkv210.c > +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c > @@ -19,6 +19,7 @@ > #include <linux/gpio.h> > #include <linux/delay.h> > #include <linux/pwm_backlight.h> > +#include <linux/platform_data/s3c-hsotg.h> > > #include <asm/hardware/vic.h> > #include <asm/mach/arch.h> > @@ -210,6 +211,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata > __initdata = { > .setup_gpio = s5pv210_fb_gpio_setup_24bpp, > }; > > +/* USB OTG */ > +static struct s3c_hsotg_plat smdkv210_hsotg_pdata; > + > static struct platform_device *smdkv210_devices[] __initdata = { > &s3c_device_adc, > &s3c_device_cfcon, > @@ -223,6 +227,7 @@ static struct platform_device *smdkv210_devices[] > __initdata = { > &s3c_device_i2c2, > &s3c_device_rtc, > &s3c_device_ts, > + &s3c_device_usb_hsotg, > &s3c_device_wdt, > &s5p_device_fimc0, > &s5p_device_fimc1, > @@ -321,6 +326,9 @@ static void __init smdkv210_machine_init(void) > > samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); > > + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); > + clk_xusbxti.rate = 24000000; Well, you need to fix following with this patch. arch/arm/mach-s5pv210/mach-smdkv210.c: In function 'smdkv210_machine_init': arch/arm/mach-s5pv210/mach-smdkv210.c:323: error: 'clk_xusbxti' undeclared (first use in this function) arch/arm/mach-s5pv210/mach-smdkv210.c:323: error: (Each undeclared identifier is reported only once arch/arm/mach-s5pv210/mach-smdkv210.c:323: error: for each function it appears in.) AS arch/arm/lib/backtrace.o make[2]: *** [arch/arm/mach-s5pv210/mach-smdkv210.o] Error 1 make[1]: *** [arch/arm/mach-s5pv210] Error 2 make[1]: *** Waiting for unfinished jobs.... Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
On 20/06/2012, Kukjin Kim <kgene.kim@samsung.com> wrote: > Sachin Kamat wrote: >> >> Adds S3C-HSOTG support to SMDKV210 board. >> >> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >> --- >> arch/arm/mach-s5pv210/Kconfig | 2 ++ >> arch/arm/mach-s5pv210/mach-smdkv210.c | 8 ++++++++ >> 2 files changed, 10 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/mach-s5pv210/Kconfig >> b/arch/arm/mach-s5pv210/Kconfig >> index 88e983b..77185c3 100644 >> --- a/arch/arm/mach-s5pv210/Kconfig >> +++ b/arch/arm/mach-s5pv210/Kconfig >> @@ -152,6 +152,7 @@ config MACH_SMDKV210 >> select S3C_DEV_I2C1 >> select S3C_DEV_I2C2 >> select S3C_DEV_RTC >> + select S3C_DEV_USB_HSOTG >> select S3C_DEV_WDT >> select S5P_DEV_FIMC0 >> select S5P_DEV_FIMC1 >> @@ -170,6 +171,7 @@ config MACH_SMDKV210 >> select S5PV210_SETUP_IDE >> select S5PV210_SETUP_KEYPAD >> select S5PV210_SETUP_SDHCI >> + select S5PV210_SETUP_USB_PHY >> help >> Machine support for Samsung SMDKV210 >> >> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach- >> s5pv210/mach-smdkv210.c >> index 91d4ad8..0041045 100644 >> --- a/arch/arm/mach-s5pv210/mach-smdkv210.c >> +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c >> @@ -19,6 +19,7 @@ >> #include <linux/gpio.h> >> #include <linux/delay.h> >> #include <linux/pwm_backlight.h> >> +#include <linux/platform_data/s3c-hsotg.h> >> >> #include <asm/hardware/vic.h> >> #include <asm/mach/arch.h> >> @@ -210,6 +211,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata >> __initdata = { >> .setup_gpio = s5pv210_fb_gpio_setup_24bpp, >> }; >> >> +/* USB OTG */ >> +static struct s3c_hsotg_plat smdkv210_hsotg_pdata; >> + >> static struct platform_device *smdkv210_devices[] __initdata = { >> &s3c_device_adc, >> &s3c_device_cfcon, >> @@ -223,6 +227,7 @@ static struct platform_device *smdkv210_devices[] >> __initdata = { >> &s3c_device_i2c2, >> &s3c_device_rtc, >> &s3c_device_ts, >> + &s3c_device_usb_hsotg, >> &s3c_device_wdt, >> &s5p_device_fimc0, >> &s5p_device_fimc1, >> @@ -321,6 +326,9 @@ static void __init smdkv210_machine_init(void) >> >> samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); >> >> + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); >> + clk_xusbxti.rate = 24000000; > > Well, you need to fix following with this patch. > > arch/arm/mach-s5pv210/mach-smdkv210.c: In function 'smdkv210_machine_init': > arch/arm/mach-s5pv210/mach-smdkv210.c:323: error: 'clk_xusbxti' undeclared > (first use in this function) > arch/arm/mach-s5pv210/mach-smdkv210.c:323: error: (Each undeclared > identifier is reported only once > arch/arm/mach-s5pv210/mach-smdkv210.c:323: error: for each function it > appears in.) > AS arch/arm/lib/backtrace.o > make[2]: *** [arch/arm/mach-s5pv210/mach-smdkv210.o] Error 1 > make[1]: *** [arch/arm/mach-s5pv210] Error 2 > make[1]: *** Waiting for unfinished jobs.... > Oops.. will send the fix shortly. > Thanks. > > Best regards, > Kgene. > -- > Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer, > SW Solution Development Team, Samsung Electronics Co., Ltd. > >
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 88e983b..77185c3 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -152,6 +152,7 @@ config MACH_SMDKV210 select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 @@ -170,6 +171,7 @@ config MACH_SMDKV210 select S5PV210_SETUP_IDE select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_USB_PHY help Machine support for Samsung SMDKV210 diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 91d4ad8..0041045 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/delay.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/s3c-hsotg.h> #include <asm/hardware/vic.h> #include <asm/mach/arch.h> @@ -210,6 +211,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +/* USB OTG */ +static struct s3c_hsotg_plat smdkv210_hsotg_pdata; + static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -223,6 +227,7 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_ts, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_fimc0, &s5p_device_fimc1, @@ -321,6 +326,9 @@ static void __init smdkv210_machine_init(void) samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); + s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata); + clk_xusbxti.rate = 24000000; + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); }
Adds S3C-HSOTG support to SMDKV210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- arch/arm/mach-s5pv210/Kconfig | 2 ++ arch/arm/mach-s5pv210/mach-smdkv210.c | 8 ++++++++ 2 files changed, 10 insertions(+), 0 deletions(-)