diff mbox series

[V2,2/6] phy: qcom-qmp-ufs: Refactor phy_power_on and phy_calibrate callbacks

Message ID 20250318144944.19749-3-quic_nitirawa@quicinc.com
State New
Headers show
Series Refactor phy powerup sequence | expand

Commit Message

Nitin Rawat March 18, 2025, 2:49 p.m. UTC 
Commit 052553af6a31 ("ufs/phy: qcom: Refactor to use phy_init call")
puts enabling regulators & clks, calibrating UFS PHY, starting serdes
and polling PCS ready status into phy_power_on.

In Current code regulators enable, clks enable, calibrating UFS PHY,
start_serdes and polling PCS_ready_status are part of phy_power_on.

UFS PHY registers are retained after power collapse, meaning calibrating
UFS PHY, start_serdes and polling PCS_ready_status can be done only when
hba is powered_on, and not needed every time when phy_power_on is called
during resume. Hence keep the code which enables PHY's regulators & clks
in phy_power_on and move the rest steps into phy_calibrate function.

Refactor the code to retain PHY regulators & clks in phy_power_on and
move out rest of the code to new phy_calibrate function.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 18 ++----------------
 1 file changed, 2 insertions(+), 16 deletions(-)

--
2.48.1
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index bb836bc0f736..0089ee80f852 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1796,7 +1796,7 @@  static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
 	return 0;
 }

-static int qmp_ufs_init(struct phy *phy)
+static int qmp_ufs_power_on(struct phy *phy)
 {
 	struct qmp_ufs *qmp = phy_get_drvdata(phy);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -1898,21 +1898,6 @@  static int qmp_ufs_exit(struct phy *phy)
 	return 0;
 }

-static int qmp_ufs_power_on(struct phy *phy)
-{
-	int ret;
-
-	ret = qmp_ufs_init(phy);
-	if (ret)
-		return ret;
-
-	ret = qmp_ufs_phy_calibrate(phy);
-	if (ret)
-		qmp_ufs_exit(phy);
-
-	return ret;
-}
-
 static int qmp_ufs_disable(struct phy *phy)
 {
 	int ret;
@@ -1942,6 +1927,7 @@  static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 static const struct phy_ops qcom_qmp_ufs_phy_ops = {
 	.power_on	= qmp_ufs_power_on,
 	.power_off	= qmp_ufs_disable,
+	.calibrate	= qmp_ufs_phy_calibrate,
 	.set_mode	= qmp_ufs_set_mode,
 	.owner		= THIS_MODULE,
 };