diff mbox series

[1/3] spi: tegra210-quad: use device_reset_optional() instead of device_reset()

Message ID 20250317-tegra-v1-1-78474efc0386@debian.org
State New
Headers show
Series spi: tegra210-quad: Improve reset and tx failures | expand

Commit Message

Breno Leitao March 17, 2025, 3:44 p.m. UTC
My UEFI machines with tegra210-quad consistently report "device reset
failed". Investigation showed this isn't an actual failure
- __device_reset() returns -ENOENT because ACPI has no "*_RST" method.

Replace device_reset() with device_reset_optional() to prevent
errors when the reset method doesn't exist. With this change, the
function only fails if the actual device reset operation fails when
called.

Signed-off-by: Breno Leitao <leitao@debian.org>
---
 drivers/spi/spi-tegra210-quad.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index 08e49a8768943..9027f995a6669 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -999,7 +999,7 @@  static void tegra_qspi_handle_error(struct tegra_qspi *tqspi)
 	dev_err(tqspi->dev, "error in transfer, fifo status 0x%08x\n", tqspi->status_reg);
 	tegra_qspi_dump_regs(tqspi);
 	tegra_qspi_flush_fifos(tqspi, true);
-	if (device_reset(tqspi->dev) < 0)
+	if (device_reset_optional(tqspi->dev) < 0)
 		dev_warn_once(tqspi->dev, "device reset failed\n");
 }
 
@@ -1149,7 +1149,7 @@  static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
 				}
 
 				/* Reset controller if timeout happens */
-				if (device_reset(tqspi->dev) < 0)
+				if (device_reset_optional(tqspi->dev) < 0)
 					dev_warn_once(tqspi->dev,
 						      "device reset failed\n");
 				ret = -EIO;
@@ -1606,7 +1606,7 @@  static int tegra_qspi_probe(struct platform_device *pdev)
 		goto exit_pm_disable;
 	}
 
-	if (device_reset(tqspi->dev) < 0)
+	if (device_reset_optional(tqspi->dev) < 0)
 		dev_warn_once(tqspi->dev, "device reset failed\n");
 
 	tqspi->def_command1_reg = QSPI_M_S | QSPI_CS_SW_HW |  QSPI_CS_SW_VAL;