@@ -2107,6 +2107,15 @@ static int bq27xxx_battery_read_dmin_volt(struct bq27xxx_device_info *di,
return 0;
}
+static bool bq27xxx_value_is_valid(struct bq27xxx_device_info *di, int value)
+{
+ /*
+ * On bq27xxx_0_zero, consider zero values invalid if EDVF is not set
+ */
+ return value || !(di->opts & BQ27XXX_O_ZERO) ||
+ (di->cache.flags & BQ27000_FLAG_EDVF);
+}
+
static int bq27xxx_simple_value(int value,
union power_supply_propval *val)
{
@@ -2147,6 +2156,8 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
ret = bq27xxx_battery_current_and_status(di, val, NULL, NULL);
break;
case POWER_SUPPLY_PROP_CAPACITY:
+ if (!bq27xxx_value_is_valid(di, di->cache.capacity))
+ return -EINVAL;
ret = bq27xxx_simple_value(di->cache.capacity, val);
break;
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
@@ -2157,9 +2168,13 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
ret = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE, val);
+ if (!ret && !bq27xxx_value_is_valid(di, val->intval))
+ return -EINVAL;
break;
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
ret = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP, val);
+ if (!ret && !bq27xxx_value_is_valid(di, val->intval))
+ return -EINVAL;
break;
case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
ret = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF, val);
@@ -2171,10 +2186,13 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
- if (di->regs[BQ27XXX_REG_NAC] != INVALID_REG_ADDR)
+ if (di->regs[BQ27XXX_REG_NAC] != INVALID_REG_ADDR) {
ret = bq27xxx_battery_read_nac(di, val);
- else
+ if (!ret && !bq27xxx_value_is_valid(di, val->intval))
+ return -EINVAL;
+ } else {
ret = bq27xxx_battery_read_rc(di, val);
+ }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL:
ret = bq27xxx_battery_read_fcc(di, val);
@@ -2199,6 +2217,8 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
break;
case POWER_SUPPLY_PROP_ENERGY_NOW:
ret = bq27xxx_battery_read_energy(di, val);
+ if (!ret && !bq27xxx_value_is_valid(di, val->intval))
+ return -EINVAL;
break;
case POWER_SUPPLY_PROP_POWER_AVG:
ret = bq27xxx_battery_pwr_avg(di, val);
On the bq27x00 and bq27x10 variants, a number of conditions can reset the value stored in the NAC register. This will cause capacity, time-to-empty, energy, and charge to report the value 0, even when the battery is full. On the other hand, the chips provide a flag, EDVF, which reliably reports the true battery empty condition, when these properties are really zero. Therefore, discard readings for these properties if their value is 0 while EDVF is unset. Tested on the Nokia N900 with bq27200. Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> --- drivers/power/supply/bq27xxx_battery.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)