| Message ID | 20250401134748.242846-1-miquel.raynal@bootlin.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] spi: cadence-qspi: revert "Improve spi memory performance" | expand |
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 559fbdfbd9f7..c90462783b3f 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -2073,7 +2073,7 @@ static const struct cqspi_driver_platdata k2g_qspi = { static const struct cqspi_driver_platdata am654_ospi = { .hwcaps_mask = CQSPI_SUPPORTS_OCTAL | CQSPI_SUPPORTS_QUAD, - .quirks = CQSPI_DISABLE_DAC_MODE | CQSPI_NEEDS_WR_DELAY, + .quirks = CQSPI_NEEDS_WR_DELAY, }; static const struct cqspi_driver_platdata intel_lgm_qspi = {
During the v6.14-rc cycles, there has been an issue with syscons which prevented TI chipid controller to probe, itself preventing the only DMA engine on AM62A with the memcpy capability to probe, which is needed for the SPI controller to work in its most efficient configuration. The SPI controller on AM62A can be used in DAC and INDAC mode, which are some kind of direct mapping vs. CPU-controlled SPI operations, respectively. However, because of hardware constraints (some kind of request line not being driven), INDAC mode cannot leverage DMA without risking to underflow the SPI FIFO. This mode costs a lot of CPU cycles. On the other side however, DAC mode can be used with and without DMA support, but in practice, DMA transfers are way more efficient because of the burst capabilities that the CPU does not have. As a result, in terms of read throughput, using a Winbond chip in 1-8-8 SDR mode, we get: - 3.5MiB/s in DAC mode without DMA - 9.0MiB/s in INDAC mode (CPU more busy) - a fluctuating 9 to 12MiB/s in DAC mode with DMA (a constant 14.5MiB/s without CPUfreq) The reason for the patch that is being reverted is that because of the syscon issue, we were using a very un-efficient DAC configuration (no DMA), but since: commit 5728c92ae112 ("mfd: syscon: Restore device_node_to_regmap() for non-syscon nodes") the probing of the DMA controller has been fixed, and the performances are back to normal, so we can safely revert this commit. This is a revert of: commit cce2200dacd6 ("spi: cadence-qspi: Improve spi memory performance") Suggested-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- Changes in v2: - Fix the commit hash. - Fix the commit title. - Fix the wording around the commit being reverted. --- drivers/spi/spi-cadence-quadspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)