diff mbox series

[v2,1/2] hwmon: (pmbus/max34440): Fix support for max34451

Message ID 20250403-dev_adpm12160-v2-1-bbf40faae988@analog.com
State New
Headers show
Series [v2,1/2] hwmon: (pmbus/max34440): Fix support for max34451 | expand

Commit Message

Alexis Czezar Torreno April 3, 2025, 5:16 a.m. UTC
The max344** family has an issue with some PMBUS address being switched.
This includes max34451 however version MAX34451-NA6 and later has this
issue fixed and this commit supports that update.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 drivers/hwmon/pmbus/max34440.c | 55 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc97042647f6c0aba4c6f520a 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -34,16 +34,22 @@  enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
 /*
  * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
  * swapped from the standard pmbus spec addresses.
+ * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
  */
 #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
 #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
 
+#define MAX34451ETNA6_MFR_REV		0x0012
+
 #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
 #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
 
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
+	bool pmbus_addr_fixed;
+	u32 iout_oc_warn_limit;
+	u32 iout_oc_fault_limit;
 };
 
 #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
@@ -60,11 +66,11 @@  static int max34440_read_word_data(struct i2c_client *client, int page,
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_FAULT_LIMIT);
+					   data->iout_oc_fault_limit);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_WARN_LIMIT);
+					   data->iout_oc_warn_limit);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
 		ret = pmbus_read_word_data(client, page, phase,
@@ -133,11 +139,11 @@  static int max34440_write_word_data(struct i2c_client *client, int page,
 
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_fault_limit,
 					    word);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_warn_limit,
 					    word);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:
@@ -235,6 +241,24 @@  static int max34451_set_supported_funcs(struct i2c_client *client,
 	 */
 
 	int page, rv;
+	bool max34451_na6 = false;
+
+	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
+	if (rv < 0)
+		return rv;
+
+	if (rv == MAX34451ETNA6_MFR_REV) {
+		max34451_na6 = true;
+		data->pmbus_addr_fixed = true;
+		data->info.format[PSC_VOLTAGE_IN] = direct;
+		data->info.format[PSC_CURRENT_IN] = direct;
+		data->info.m[PSC_VOLTAGE_IN] = 1;
+		data->info.b[PSC_VOLTAGE_IN] = 0;
+		data->info.R[PSC_VOLTAGE_IN] = 3;
+		data->info.m[PSC_CURRENT_IN] = 1;
+		data->info.b[PSC_CURRENT_IN] = 0;
+		data->info.R[PSC_CURRENT_IN] = 2;
+	}
 
 	for (page = 0; page < 16; page++) {
 		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
@@ -251,16 +275,30 @@  static int max34451_set_supported_funcs(struct i2c_client *client,
 		case 0x20:
 			data->info.func[page] = PMBUS_HAVE_VOUT |
 				PMBUS_HAVE_STATUS_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x21:
 			data->info.func[page] = PMBUS_HAVE_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN;
 			break;
 		case 0x22:
 			data->info.func[page] = PMBUS_HAVE_IOUT |
 				PMBUS_HAVE_STATUS_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x23:
 			data->info.func[page] = PMBUS_HAVE_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN;
 			break;
 		default:
 			break;
@@ -494,6 +532,7 @@  static int max34440_probe(struct i2c_client *client)
 		return -ENOMEM;
 	data->id = i2c_match_id(max34440_id, client)->driver_data;
 	data->info = max34440_info[data->id];
+	data->pmbus_addr_fixed = false;
 
 	if (data->id == max34451) {
 		rv = max34451_set_supported_funcs(client, data);
@@ -501,6 +540,14 @@  static int max34440_probe(struct i2c_client *client)
 			return rv;
 	}
 
+	if (data->pmbus_addr_fixed) {
+		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
+	} else {
+		data->iout_oc_fault_limit = MAX34440_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = MAX34440_IOUT_OC_WARN_LIMIT;
+	}
+
 	return pmbus_do_probe(client, &data->info);
 }