diff mbox series

[v2,1/3] arm64: dts: qcom: x1e80100-hp-x14: add usb-1-ss1-sbu-mux

Message ID 20250410-hp-x14-v2-1-d36414704a0a@oldschoolsolutions.biz
State New
Headers show
Series arm64: dts: qcom: x1e80100-hp-x14: add usb-1-ss1-sbu-mux | expand

Commit Message

Jens Glathe via B4 Relay April 10, 2025, 10:07 a.m. UTC 
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>

The usb_1_1 port doesn't have the PS8830 repeater, but apparently some
MUX for DP altmode control. After a suggestion from sgerhold on
'#aarch64-laptops' I added gpio-sbu-mux nodes from the x1e80100-QCP
tree, and this appears to work well. It is still guesswork, but
working guesswork.

Added and rewired for usb_1_1

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
 .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 26ea1787e5ecfb727a4f890895b7d7fb7b3f005d..582d4326d5d527d20f99e716349ea0e9c0d35099 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -153,6 +153,14 @@  pmic_glink_ss1_ss_in: endpoint {
 						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
 			};
 		};
 	};
@@ -477,6 +485,25 @@  vreg_pmu_rfa_1p7: ldo9 {
 			};
 		};
 	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -1424,6 +1451,30 @@  reset-n-pins {
 		};
 	};
 
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio191";
 		function = "gpio";