| Message ID | E1u3bYV-000EcQ-Cv@rmk-PC.armlinux.org.uk |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next,1/4] net: stmmac: qcom-ethqos: set serdes speed using serdes_speed | expand |
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index cd25aea3e48f..e8d4925be21c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -676,7 +676,6 @@ static void qcom_ethqos_speed_mode_2500(struct net_device *ndev, void *data) { struct stmmac_priv *priv = netdev_priv(ndev); - priv->plat->max_speed = 2500; priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX; }
Phylink will already limit the MAC speed according to the interface, so if 2500BASE-X is selected, the maximum speed will be 2.5G. It is, therefore, not necessary to set a speed limit. Remove setting plat_dat->max_speed from this glue driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 1 - 1 file changed, 1 deletion(-)