diff mbox series

[v2] cpufreq: fix compile-test defaults

Message ID 20250417065535.21358-1-johan+linaro@kernel.org
State New
Headers show
Series [v2] cpufreq: fix compile-test defaults | expand

Commit Message

Johan Hovold April 17, 2025, 6:55 a.m. UTC
Commit 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers")
enabled compile testing of most Arm CPUFreq drivers but left the
existing default values unchanged so that many drivers are enabled by
default whenever COMPILE_TEST is selected.

This specifically results in the S3C64XX CPUFreq driver being enabled
and initialised during boot of non-S3C64XX platforms with the following
error logged:

	cpufreq: Unable to obtain ARMCLK: -2

Commit d4f610a9bafd ("cpufreq: Do not enable by default during compile
testing") recently fixed most of the default values, but two entries
were missed and two could use a more specific default condition.

Fix the default values for drivers that can be compile tested and that
should be enabled by default when not compile testing.

Fixes: 3f66425a4fc8 ("cpufreq: Enable COMPILE_TEST on Arm drivers")
Fixes: d4f610a9bafd ("cpufreq: Do not enable by default during compile testing")
Cc: stable@vger.kernel.org	# 6.12
Cc: Rob Herring (Arm) <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---

Changes in v2:
 - rebase on commit d4f610a9bafd ("cpufreq: Do not enable by default
   during compile testing")


 drivers/cpufreq/Kconfig.arm | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index d4d625ded285..0d46402e3094 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -76,7 +76,7 @@  config ARM_VEXPRESS_SPC_CPUFREQ
 config ARM_BRCMSTB_AVS_CPUFREQ
 	tristate "Broadcom STB AVS CPUfreq driver"
 	depends on (ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ) || COMPILE_TEST
-	default ARCH_BRCMSTB
+	default y if ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ
 	help
 	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
 	  ("AVS") to handle voltage and frequency scaling. This driver provides
@@ -88,7 +88,7 @@  config ARM_HIGHBANK_CPUFREQ
 	tristate "Calxeda Highbank-based"
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	depends on CPUFREQ_DT && REGULATOR && PL320_MBOX
-	default m
+	default m if ARCH_HIGHBANK
 	help
 	  This adds the CPUFreq driver for Calxeda Highbank SoC
 	  based boards.
@@ -133,7 +133,7 @@  config ARM_MEDIATEK_CPUFREQ
 config ARM_MEDIATEK_CPUFREQ_HW
 	tristate "MediaTek CPUFreq HW driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
-	default m
+	default m if ARCH_MEDIATEK
 	help
 	  Support for the CPUFreq HW driver.
 	  Some MediaTek chipsets have a HW engine to offload the steps
@@ -256,7 +256,7 @@  config ARM_TEGRA194_CPUFREQ
 	tristate "Tegra194 CPUFreq support"
 	depends on ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || (64BIT && COMPILE_TEST)
 	depends on TEGRA_BPMP
-	default ARCH_TEGRA
+	default ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC
 	help
 	  This adds CPU frequency driver support for Tegra194 SOCs.