diff mbox series

[v5,3/5] i2c: piix4: Move SB800_PIIX4_FCH_PM_ADDR definition to amd/fch.h

Message ID 20250422234830.2840784-4-superm1@kernel.org
State New
Headers show
Series [v5,1/5] Documentation: Add AMD Zen debugging document | expand

Commit Message

Mario Limonciello April 22, 2025, 11:48 p.m. UTC 
From: Mario Limonciello <mario.limonciello@amd.com>

SB800_PIIX4_FCH_PM_ADDR is used to indicate the base address for the
FCH PM registers.  Multiple drivers may need this base address, so
move it to a common header location and rename accordingly.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v5:
 * Move <asm> header after <linux> headers
v4:
 * Move FCH_PM_DECODEEN to fch.h, but shift it for use in piix4 because
   piix4 does 8 bit reads
---
 arch/x86/include/asm/amd/fch.h | 12 ++++++++++++
 drivers/i2c/busses/i2c-piix4.c | 18 +++++++++---------
 2 files changed, 21 insertions(+), 9 deletions(-)
 create mode 100644 arch/x86/include/asm/amd/fch.h
diff mbox series

Patch

diff --git a/arch/x86/include/asm/amd/fch.h b/arch/x86/include/asm/amd/fch.h
new file mode 100644
index 0000000000000..a5fd91ff92df3
--- /dev/null
+++ b/arch/x86/include/asm/amd/fch.h
@@ -0,0 +1,12 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_X86_AMD_FCH_H_
+#define _ASM_X86_AMD_FCH_H_
+
+#define FCH_PM_BASE			0xFED80300
+
+/* register offsets from PM base */
+#define FCH_PM_DECODEEN			0x00
+#define FCH_PM_DECODEEN_SMBUS0SEL	GENMASK(20, 19)
+
+#endif
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index dd75916157f05..59ecaa990bce3 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -34,6 +34,7 @@ 
 #include <linux/dmi.h>
 #include <linux/acpi.h>
 #include <linux/io.h>
+#include <asm/amd/fch.h>
 
 #include "i2c-piix4.h"
 
@@ -80,12 +81,11 @@ 
 #define SB800_PIIX4_PORT_IDX_MASK	0x06
 #define SB800_PIIX4_PORT_IDX_SHIFT	1
 
-/* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
-#define SB800_PIIX4_PORT_IDX_KERNCZ		0x02
-#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	0x18
+/* SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
+#define SB800_PIIX4_PORT_IDX_KERNCZ		(FCH_PM_DECODEEN + 0x02)
+#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	(FCH_PM_DECODEEN_SMBUS0SEL >> 16)
 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ	3
 
-#define SB800_PIIX4_FCH_PM_ADDR			0xFED80300
 #define SB800_PIIX4_FCH_PM_SIZE			8
 #define SB800_ASF_ACPI_PATH			"\\_SB.ASFC"
 
@@ -162,19 +162,19 @@  int piix4_sb800_region_request(struct device *dev, struct sb800_mmio_cfg *mmio_c
 	if (mmio_cfg->use_mmio) {
 		void __iomem *addr;
 
-		if (!request_mem_region_muxed(SB800_PIIX4_FCH_PM_ADDR,
+		if (!request_mem_region_muxed(FCH_PM_BASE,
 					      SB800_PIIX4_FCH_PM_SIZE,
 					      "sb800_piix4_smb")) {
 			dev_err(dev,
 				"SMBus base address memory region 0x%x already in use.\n",
-				SB800_PIIX4_FCH_PM_ADDR);
+				FCH_PM_BASE);
 			return -EBUSY;
 		}
 
-		addr = ioremap(SB800_PIIX4_FCH_PM_ADDR,
+		addr = ioremap(FCH_PM_BASE,
 			       SB800_PIIX4_FCH_PM_SIZE);
 		if (!addr) {
-			release_mem_region(SB800_PIIX4_FCH_PM_ADDR,
+			release_mem_region(FCH_PM_BASE,
 					   SB800_PIIX4_FCH_PM_SIZE);
 			dev_err(dev, "SMBus base address mapping failed.\n");
 			return -ENOMEM;
@@ -201,7 +201,7 @@  void piix4_sb800_region_release(struct device *dev, struct sb800_mmio_cfg *mmio_
 {
 	if (mmio_cfg->use_mmio) {
 		iounmap(mmio_cfg->addr);
-		release_mem_region(SB800_PIIX4_FCH_PM_ADDR,
+		release_mem_region(FCH_PM_BASE,
 				   SB800_PIIX4_FCH_PM_SIZE);
 		return;
 	}