diff mbox series

[ath-next,02/13] wifi: ath12k: avoid call ath12k_dp_mon_parse_rx_dest_tlv() for WCN7850

Message ID 20250421023444.1778-3-kang.yang@oss.qualcomm.com
State New
Headers show
Series wifi: ath12k: add monitor mode support for WCN7850 | expand

Commit Message

Kang Yang April 21, 2025, 2:34 a.m. UTC
WCN7850 doesn't have RX MON component. So it's monitor mode design is
quite different from AP based chips like QCN9274, which have RX MON
component.

ath12k_dp_mon_parse_rx_dest_tlv() is such a specific function for AP based
chips.

So don't call this function for WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <kang.yang@oss.qualcomm.com>
---
 drivers/net/wireless/ath/ath12k/dp_mon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/dp_mon.c b/drivers/net/wireless/ath/ath12k/dp_mon.c
index 7404d21eed3b..351f52138d39 100644
--- a/drivers/net/wireless/ath/ath12k/dp_mon.c
+++ b/drivers/net/wireless/ath/ath12k/dp_mon.c
@@ -2368,7 +2368,7 @@  ath12k_dp_mon_parse_rx_dest(struct ath12k *ar, struct ath12k_mon_data *pmon,
 
 		hal_status = ath12k_dp_mon_rx_parse_status_tlv(ar, pmon, tlv);
 
-		if (ar->monitor_started &&
+		if (ar->monitor_started && ar->ab->hw_params->rxdma1_enable &&
 		    ath12k_dp_mon_parse_rx_dest_tlv(ar, pmon, hal_status, tlv->value))
 			return HAL_RX_MON_STATUS_PPDU_DONE;