diff mbox series

[v2,1/2] platform/x86: int3472: add hpd pin support

Message ID 20250425100739.3099535-1-dongcheng.yan@intel.com
State New
Headers show
Series [v2,1/2] platform/x86: int3472: add hpd pin support | expand

Commit Message

Dongcheng Yan April 25, 2025, 10:07 a.m. UTC 
Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is
being received. On the host side this is wired to a GPIO for polling or
interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges
lt6911uxe and lt6911uxc.

The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it
here as well.

Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
---
 drivers/platform/x86/intel/int3472/common.h   | 1 +
 drivers/platform/x86/intel/int3472/discrete.c | 6 ++++++
 2 files changed, 7 insertions(+)


base-commit: 01c6df60d5d4ae00cd5c1648818744838bba7763
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
index 145dec66df64..db4cd3720e24 100644
--- a/drivers/platform/x86/intel/int3472/common.h
+++ b/drivers/platform/x86/intel/int3472/common.h
@@ -22,6 +22,7 @@ 
 #define INT3472_GPIO_TYPE_POWER_ENABLE				0x0b
 #define INT3472_GPIO_TYPE_CLK_ENABLE				0x0c
 #define INT3472_GPIO_TYPE_PRIVACY_LED				0x0d
+#define INT3472_GPIO_TYPE_HOTPLUG_DETECT			0x13
 
 #define INT3472_PDEV_MAX_NAME_LEN				23
 #define INT3472_MAX_SENSOR_GPIOS				3
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 30ff8f3ea1f5..26215d1b63a2 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -186,6 +186,10 @@  static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
 		*con_id = "privacy-led";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
+	case INT3472_GPIO_TYPE_HOTPLUG_DETECT:
+		*con_id = "hpd";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
 		*con_id = "power-enable";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
@@ -212,6 +216,7 @@  static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
  * 0x0b Power enable
  * 0x0c Clock enable
  * 0x0d Privacy LED
+ * 0x13 Hotplug detect
  *
  * There are some known platform specific quirks where that does not quite
  * hold up; for example where a pin with type 0x01 (Power down) is mapped to
@@ -281,6 +286,7 @@  static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
+	case INT3472_GPIO_TYPE_HOTPLUG_DETECT:
 		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";