@@ -584,10 +584,17 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
* device transitioning into MHI READY state
*/
if (fw_load_type == MHI_FW_LOAD_FBC) {
- ret = mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->fbc_image, fw_sz);
- if (ret) {
- release_firmware(firmware);
- goto error_fw_load;
+ if (mhi_cntrl->fbc_image && fw_sz != mhi_cntrl->prev_fw_sz) {
+ mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
+ mhi_cntrl->fbc_image = NULL;
+ }
+ if (!mhi_cntrl->fbc_image) {
+ ret = mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->fbc_image, fw_sz);
+ if (ret) {
+ release_firmware(firmware);
+ goto error_fw_load;
+ }
+ mhi_cntrl->prev_fw_sz = fw_sz;
}
/* Load the firmware into BHIE vec table */
@@ -1173,8 +1173,9 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
/*
* Allocate RDDM table for debugging purpose if specified
*/
- mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
- mhi_cntrl->rddm_size);
+ if (!mhi_cntrl->rddm_image)
+ mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->rddm_image,
+ mhi_cntrl->rddm_size);
if (mhi_cntrl->rddm_image) {
ret = mhi_rddm_prepare(mhi_cntrl,
mhi_cntrl->rddm_image);
@@ -1259,10 +1259,19 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
}
EXPORT_SYMBOL_GPL(mhi_power_down);
+void mhi_power_down_unprepare_keep_dev(struct mhi_controller *mhi_cntrl)
+{
+ mhi_cntrl->bhi = NULL;
+ mhi_cntrl->bhie = NULL;
+
+ mhi_deinit_dev_ctxt(mhi_cntrl);
+}
+
void mhi_power_down_keep_dev(struct mhi_controller *mhi_cntrl,
bool graceful)
{
__mhi_power_down(mhi_cntrl, graceful, false);
+ mhi_power_down_unprepare_keep_dev(mhi_cntrl);
}
EXPORT_SYMBOL_GPL(mhi_power_down_keep_dev);
@@ -460,12 +460,12 @@ void ath11k_mhi_stop(struct ath11k_pci *ab_pci, bool is_suspend)
* workaround, otherwise ath11k_core_resume() will timeout
* during resume.
*/
- if (is_suspend)
+ if (is_suspend) {
mhi_power_down_keep_dev(ab_pci->mhi_ctrl, true);
- else
+ } else {
mhi_power_down(ab_pci->mhi_ctrl, true);
-
- mhi_unprepare_after_power_down(ab_pci->mhi_ctrl);
+ mhi_unprepare_after_power_down(ab_pci->mhi_ctrl);
+ }
}
int ath11k_mhi_suspend(struct ath11k_pci *ab_pci)
@@ -635,12 +635,12 @@ void ath12k_mhi_stop(struct ath12k_pci *ab_pci, bool is_suspend)
* workaround, otherwise ath12k_core_resume() will timeout
* during resume.
*/
- if (is_suspend)
+ if (is_suspend) {
ath12k_mhi_set_state(ab_pci, ATH12K_MHI_POWER_OFF_KEEP_DEV);
- else
+ } else {
ath12k_mhi_set_state(ab_pci, ATH12K_MHI_POWER_OFF);
-
- ath12k_mhi_set_state(ab_pci, ATH12K_MHI_DEINIT);
+ ath12k_mhi_set_state(ab_pci, ATH12K_MHI_DEINIT);
+ }
}
void ath12k_mhi_suspend(struct ath12k_pci *ab_pci)
@@ -306,6 +306,7 @@ struct mhi_controller_config {
* if fw_image is NULL and fbc_download is true (optional)
* @fw_sz: Firmware image data size for normal booting, used only if fw_image
* is NULL and fbc_download is true (optional)
+ * @prev_fw_sz: Previous firmware image data size, when fbc_download is true
* @edl_image: Firmware image name for emergency download mode (optional)
* @rddm_size: RAM dump size that host should allocate for debugging purpose
* @sbl_size: SBL image size downloaded through BHIe (optional)
@@ -382,6 +383,7 @@ struct mhi_controller {
const char *fw_image;
const u8 *fw_data;
size_t fw_sz;
+ size_t prev_fw_sz;
const char *edl_image;
size_t rddm_size;
size_t sbl_size;
Fix dma_direct_alloc() failure at resume time during bhie_table allocation. There is a crash report where at resume time, the memory from the dma doesn't get allocated and MHI fails to re-initialize. There is fragmentation/memory pressure. To fix it, don't free the memory at power down during suspend / hibernation. Instead, use the same allocated memory again after every resume / hibernation. This patch has been tested with resume and hibernation both. The rddm is of constant size for a given hardware. While the fbc_image size depends on the firmware. If the firmware changes, we'll free and allocate new memory for it. Here are the crash logs: [ 3029.338587] mhi mhi0: Requested to power ON [ 3029.338621] mhi mhi0: Power on setup success [ 3029.668654] kworker/u33:8: page allocation failure: order:7, mode:0xc04(GFP_NOIO|GFP_DMA32), nodemask=(null),cpuset=/,mems_allowed=0 [ 3029.668682] CPU: 4 UID: 0 PID: 2744 Comm: kworker/u33:8 Not tainted 6.11.11-valve10-1-neptune-611-gb69e902b4338 #1ed779c892334112fb968aaa3facf9686b5ff0bd7 [ 3029.668690] Hardware name: Valve Galileo/Galileo, BIOS F7G0112 08/01/2024 [ 3029.668694] Workqueue: mhi_hiprio_wq mhi_pm_st_worker [mhi] [ 3029.668717] Call Trace: [ 3029.668722] <TASK> [ 3029.668728] dump_stack_lvl+0x4e/0x70 [ 3029.668738] warn_alloc+0x164/0x190 [ 3029.668747] ? srso_return_thunk+0x5/0x5f [ 3029.668754] ? __alloc_pages_direct_compact+0xaf/0x360 [ 3029.668761] __alloc_pages_slowpath.constprop.0+0xc75/0xd70 [ 3029.668774] __alloc_pages_noprof+0x321/0x350 [ 3029.668782] __dma_direct_alloc_pages.isra.0+0x14a/0x290 [ 3029.668790] dma_direct_alloc+0x70/0x270 [ 3029.668796] mhi_alloc_bhie_table+0xe8/0x190 [mhi faa917c5aa23a5f5b12d6a2c597067e16d2fedc0] [ 3029.668814] mhi_fw_load_handler+0x1bc/0x310 [mhi faa917c5aa23a5f5b12d6a2c597067e16d2fedc0] [ 3029.668830] mhi_pm_st_worker+0x5c8/0xaa0 [mhi faa917c5aa23a5f5b12d6a2c597067e16d2fedc0] [ 3029.668844] ? srso_return_thunk+0x5/0x5f [ 3029.668853] process_one_work+0x17e/0x330 [ 3029.668861] worker_thread+0x2ce/0x3f0 [ 3029.668868] ? __pfx_worker_thread+0x10/0x10 [ 3029.668873] kthread+0xd2/0x100 [ 3029.668879] ? __pfx_kthread+0x10/0x10 [ 3029.668885] ret_from_fork+0x34/0x50 [ 3029.668892] ? __pfx_kthread+0x10/0x10 [ 3029.668898] ret_from_fork_asm+0x1a/0x30 [ 3029.668910] </TASK> Tested-on: WCN6855 WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6 Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> --- Changes since v1: - Don't free bhie tables during suspend/hibernation only - Handle fbc_image changed size correctly - Remove fbc_image getting set to NULL in *free_bhie_table() Changes since v2: - Remove the new mhi_partial_unprepare_after_power_down() and instead update mhi_power_down_keep_dev() to use mhi_power_down_unprepare_keep_dev() as suggested by Mani - Update all users of this API such as ath12k (previously only ath11k was updated) - Define prev_fw_sz in docs - Do better alignment of comments Tested on ath11k. --- drivers/bus/mhi/host/boot.c | 15 +++++++++++---- drivers/bus/mhi/host/init.c | 5 +++-- drivers/bus/mhi/host/pm.c | 9 +++++++++ drivers/net/wireless/ath/ath11k/mhi.c | 8 ++++---- drivers/net/wireless/ath/ath12k/mhi.c | 8 ++++---- include/linux/mhi.h | 2 ++ 6 files changed, 33 insertions(+), 14 deletions(-)