diff mbox series

[v2,1/5] powerpc: sysdev/gpio: use new line value setter callbacks

Message ID 20250502-gpiochip-set-rv-powerpc-v2-1-488e43e325bf@linaro.org
State New
Headers show
Series powerpc: convert board-file GPIO chips to using new value setters | expand

Commit Message

Bartosz Golaszewski May 2, 2025, 8:59 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/powerpc/sysdev/cpm_common.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 47db732981a8b..e22fc638dbc7c 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -138,7 +138,7 @@  static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
 	out_be32(&iop->dat, cpm2_gc->cpdata);
 }
 
-static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static int cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
@@ -150,6 +150,8 @@  static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 	__cpm2_gpio32_set(mm_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
+	return 0;
 }
 
 static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
@@ -208,7 +210,7 @@  int cpm2_gpiochip_add32(struct device *dev)
 	gc->direction_input = cpm2_gpio32_dir_in;
 	gc->direction_output = cpm2_gpio32_dir_out;
 	gc->get = cpm2_gpio32_get;
-	gc->set = cpm2_gpio32_set;
+	gc->set_rv = cpm2_gpio32_set;
 	gc->parent = dev;
 	gc->owner = THIS_MODULE;