@@ -19,28 +19,11 @@
#define CSI2_PAD_SOURCE 1
#define CSI2_PADS_NUM 2
-#define CSI2_MAX_ACPI_GPIOS 2u
-
-struct acpi_device;
struct v4l2_device;
struct atomisp_device;
struct atomisp_sub_device;
-struct atomisp_csi2_acpi_gpio_map {
- struct acpi_gpio_params params[CSI2_MAX_ACPI_GPIOS];
- struct acpi_gpio_mapping mapping[CSI2_MAX_ACPI_GPIOS + 1];
-};
-
-struct atomisp_csi2_acpi_gpio_parsing_data {
- struct acpi_device *adev;
- struct atomisp_csi2_acpi_gpio_map *map;
- u32 settings[CSI2_MAX_ACPI_GPIOS];
- unsigned int settings_count;
- unsigned int res_count;
- unsigned int map_count;
-};
-
struct atomisp_mipi_csi2_device {
struct v4l2_subdev subdev;
struct media_pad pads[CSI2_PADS_NUM];
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmi.h>
+#include <linux/platform_data/x86/int3472.h>
#include <linux/property.h>
#include <media/ipu-bridge.h>
@@ -24,39 +25,6 @@
#define PMC_CLK_RATE_19_2MHZ 19200000
-/*
- * 79234640-9e10-4fea-a5c1-b5aa8b19756f
- * This _DSM GUID returns information about the GPIO lines mapped to a sensor.
- * Function number 1 returns a count of the GPIO lines that are mapped.
- * Subsequent functions return 32 bit ints encoding information about the GPIO.
- */
-static const guid_t intel_sensor_gpio_info_guid =
- GUID_INIT(0x79234640, 0x9e10, 0x4fea,
- 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f);
-
-#define INTEL_GPIO_DSM_TYPE_SHIFT 0
-#define INTEL_GPIO_DSM_TYPE_MASK GENMASK(7, 0)
-#define INTEL_GPIO_DSM_PIN_SHIFT 8
-#define INTEL_GPIO_DSM_PIN_MASK GENMASK(15, 8)
-#define INTEL_GPIO_DSM_SENSOR_ON_VAL_SHIFT 24
-#define INTEL_GPIO_DSM_SENSOR_ON_VAL_MASK GENMASK(31, 24)
-
-#define INTEL_GPIO_DSM_TYPE(x) \
- (((x) & INTEL_GPIO_DSM_TYPE_MASK) >> INTEL_GPIO_DSM_TYPE_SHIFT)
-#define INTEL_GPIO_DSM_PIN(x) \
- (((x) & INTEL_GPIO_DSM_PIN_MASK) >> INTEL_GPIO_DSM_PIN_SHIFT)
-#define INTEL_GPIO_DSM_SENSOR_ON_VAL(x) \
- (((x) & INTEL_GPIO_DSM_SENSOR_ON_VAL_MASK) >> INTEL_GPIO_DSM_SENSOR_ON_VAL_SHIFT)
-
-/*
- * 822ace8f-2814-4174-a56b-5f029fe079ee
- * This _DSM GUID returns a string from the sensor device, which acts as a
- * module identifier.
- */
-static const guid_t intel_sensor_module_guid =
- GUID_INIT(0x822ace8f, 0x2814, 0x4174,
- 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee);
-
/*
* dc2f6c4f-045b-4f1d-97b9-882a6860a4be
* This _DSM GUID returns a package with n*2 strings, with each set of 2 strings
@@ -323,195 +291,44 @@ static int atomisp_csi2_get_port(struct acpi_device *adev, int clock_num)
return gmin_cfg_get_int(adev, "CsiPort", port);
}
-/* Note this always returns 1 to continue looping so that res_count is accurate */
-static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_data)
-{
- struct atomisp_csi2_acpi_gpio_parsing_data *data = _data;
- struct acpi_resource_gpio *agpio;
- const char *name;
- bool active_low;
- unsigned int i;
- u32 settings = 0;
- u16 pin;
-
- if (!acpi_gpio_get_io_resource(ares, &agpio))
- return 1; /* Not a GPIO, continue the loop */
-
- data->res_count++;
-
- pin = agpio->pin_table[0];
- for (i = 0; i < data->settings_count; i++) {
- if (INTEL_GPIO_DSM_PIN(data->settings[i]) == pin) {
- settings = data->settings[i];
- break;
- }
- }
-
- if (i == data->settings_count) {
- acpi_handle_warn(data->adev->handle,
- "%s: Could not find DSM GPIO settings for pin %u\n",
- dev_name(&data->adev->dev), pin);
- return 1;
- }
-
- switch (INTEL_GPIO_DSM_TYPE(settings)) {
- case 0:
- name = "reset-gpios";
- break;
- case 1:
- name = "powerdown-gpios";
- break;
- default:
- acpi_handle_warn(data->adev->handle, "%s: Unknown GPIO type 0x%02lx for pin %u\n",
- dev_name(&data->adev->dev),
- INTEL_GPIO_DSM_TYPE(settings), pin);
- return 1;
- }
-
- /*
- * Both reset and power-down need to be logical false when the sensor
- * is on (sensor should not be in reset and not be powered-down). So
- * when the sensor-on-value (which is the physical pin value) is high,
- * then the signal is active-low.
- */
- active_low = INTEL_GPIO_DSM_SENSOR_ON_VAL(settings);
-
- i = data->map_count;
- if (i == CSI2_MAX_ACPI_GPIOS)
- return 1;
-
- /* res_count is already incremented */
- data->map->params[i].crs_entry_index = data->res_count - 1;
- data->map->params[i].active_low = active_low;
- data->map->mapping[i].name = name;
- data->map->mapping[i].data = &data->map->params[i];
- data->map->mapping[i].size = 1;
- data->map_count++;
-
- acpi_handle_info(data->adev->handle, "%s: %s crs %d %s pin %u active-%s\n",
- dev_name(&data->adev->dev), name,
- data->res_count - 1, agpio->resource_source.string_ptr,
- pin, active_low ? "low" : "high");
-
- return 1;
-}
-
/*
- * Helper function to create an ACPI GPIO lookup table for sensor reset and
- * powerdown signals on Intel Bay Trail (BYT) and Cherry Trail (CHT) devices,
- * including setting the correct polarity for the GPIO.
+ * Alloc and fill an int3472_discrete_device struct so that we can re-use
+ * the INT3472 sensor GPIO mapping code.
*
- * This uses the "79234640-9e10-4fea-a5c1-b5aa8b19756f" DSM method directly
- * on the sensor device's ACPI node. This is different from later Intel
- * hardware which has a separate INT3472 acpi_device with this info.
- *
- * This function must be called before creating the sw-noded describing
- * the fwnode graph endpoint. And sensor drivers used on these devices
- * must return -EPROBE_DEFER when there is no endpoint description yet.
- * Together this guarantees that the GPIO lookups are in place before
- * the sensor driver tries to get GPIOs with gpiod_get().
- *
- * Note this code uses the same DSM GUID as the int3472_gpio_guid in
- * the INT3472 discrete.c code and there is some overlap, but there are
- * enough differences that it is difficult to share the code.
+ * This gets called from ipu_bridge_init() which runs only once per boot,
+ * the created faux int3472 device is leaked on purpose to keep the created
+ * GPIO mappings around permanently.
*/
static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
{
- struct atomisp_csi2_acpi_gpio_parsing_data data = { };
- LIST_HEAD(resource_list);
- union acpi_object *obj;
- unsigned int i, j;
+ struct int3472_discrete_device *int3472;
int ret;
- obj = acpi_evaluate_dsm_typed(adev->handle, &intel_sensor_module_guid,
- 0x00, 1, NULL, ACPI_TYPE_STRING);
- if (obj) {
- acpi_handle_info(adev->handle, "%s: Sensor module id: '%s'\n",
- dev_name(&adev->dev), obj->string.pointer);
- ACPI_FREE(obj);
- }
-
- /*
- * First get the GPIO-settings count and then get count GPIO-settings
- * values. Note the order of these may differ from the order in which
- * the GPIOs are listed on the ACPI resources! So we first store them all
- * and then enumerate the ACPI resources and match them up by pin number.
- */
- obj = acpi_evaluate_dsm_typed(adev->handle,
- &intel_sensor_gpio_info_guid, 0x00, 1,
- NULL, ACPI_TYPE_INTEGER);
- if (!obj) {
- acpi_handle_err(adev->handle, "%s: No _DSM entry for GPIO pin count\n",
- dev_name(&adev->dev));
- return -EIO;
- }
-
- data.settings_count = obj->integer.value;
- ACPI_FREE(obj);
-
- if (data.settings_count > CSI2_MAX_ACPI_GPIOS) {
- acpi_handle_err(adev->handle, "%s: Too many GPIOs %u > %u\n",
- dev_name(&adev->dev), data.settings_count,
- CSI2_MAX_ACPI_GPIOS);
- return -EOVERFLOW;
- }
-
- for (i = 0; i < data.settings_count; i++) {
- /*
- * i + 2 because the index of this _DSM function is 1-based
- * and the first function is just a count.
- */
- obj = acpi_evaluate_dsm_typed(adev->handle,
- &intel_sensor_gpio_info_guid,
- 0x00, i + 2,
- NULL, ACPI_TYPE_INTEGER);
- if (!obj) {
- acpi_handle_err(adev->handle, "%s: No _DSM entry for pin %u\n",
- dev_name(&adev->dev), i);
- return -EIO;
- }
-
- data.settings[i] = obj->integer.value;
- ACPI_FREE(obj);
- }
-
- /* Since we match up by pin-number the pin-numbers must be unique */
- for (i = 0; i < data.settings_count; i++) {
- for (j = i + 1; j < data.settings_count; j++) {
- if (INTEL_GPIO_DSM_PIN(data.settings[i]) !=
- INTEL_GPIO_DSM_PIN(data.settings[j]))
- continue;
-
- acpi_handle_err(adev->handle, "%s: Duplicate pin number %lu\n",
- dev_name(&adev->dev),
- INTEL_GPIO_DSM_PIN(data.settings[i]));
- return -EIO;
- }
- }
-
- data.map = kzalloc(sizeof(*data.map), GFP_KERNEL);
- if (!data.map)
+ /* Max num GPIOs we've seen plus a terminator */
+ int3472 = kzalloc(struct_size(int3472, gpios.table, INT3472_MAX_SENSOR_GPIOS + 1),
+ GFP_KERNEL);
+ if (!int3472)
return -ENOMEM;
- /* Now parse the ACPI resources and build the lookup table */
- data.adev = adev;
- ret = acpi_dev_get_resources(adev, &resource_list,
- atomisp_csi2_handle_acpi_gpio_res, &data);
- if (ret < 0)
- return ret;
+ /*
+ * On atomisp the _DSM to get the GPIO type must be made on the sensor
+ * adev, rather then on a separate INT3472 adev.
+ */
+ int3472->adev = adev;
+ int3472->dev = &adev->dev;
+ int3472->sensor = adev;
- acpi_dev_free_resource_list(&resource_list);
+ int3472->sensor_name = kasprintf(GFP_KERNEL, I2C_DEV_NAME_FORMAT, acpi_dev_name(adev));
+ if (!int3472->sensor_name) {
+ kfree(int3472);
+ return -ENOMEM;
+ }
- if (data.map_count != data.settings_count ||
- data.res_count != data.settings_count)
- acpi_handle_warn(adev->handle, "%s: ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
- dev_name(&adev->dev), data.settings_count,
- data.res_count, data.map_count);
-
- ret = acpi_dev_add_driver_gpios(adev, data.map->mapping);
- if (ret)
- acpi_handle_err(adev->handle, "%s: Error adding driver GPIOs: %d\n",
- dev_name(&adev->dev), ret);
+ ret = int3472_discrete_parse_crs(int3472);
+ if (ret) {
+ int3472_discrete_cleanup(int3472);
+ kfree(int3472);
+ }
return ret;
}
@@ -1513,3 +1513,4 @@ MODULE_AUTHOR("Xiaolin Zhang <xiaolin.zhang@intel.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Intel ATOM Platform ISP Driver");
MODULE_IMPORT_NS("INTEL_IPU_BRIDGE");
+MODULE_IMPORT_NS("INTEL_INT3472_DISCRETE");
Replace the duplicate code for calling the special Intel camera sensor GPIO type _DSM (79234640-9e10-4fea-a5c1-b5aa8b19756f) and mapping GPIOs to the sensor with a call to int3472_discrete_parse_crs() from the int3472 driver. Besides avoiding code duplication the int3472 version of the code also supports more features, like mapping the powerdown GPIO to a regulator on the mt9m114 which is necessary to make the camera on the Asus T100TA work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../staging/media/atomisp/pci/atomisp_csi2.h | 17 -- .../media/atomisp/pci/atomisp_csi2_bridge.c | 239 ++---------------- .../staging/media/atomisp/pci/atomisp_v4l2.c | 1 + 3 files changed, 29 insertions(+), 228 deletions(-)