| Message ID | 6143603464a65aebbed281fe6c6164316dd07269.1746711762.git.stano.jakubek@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Moto G (2013) DTS updates | expand |
diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts index d6d5a86491aac..e6392f7d14c75 100644 --- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts +++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts @@ -62,9 +62,12 @@ key-volume-up { }; }; + /* TI TPS22902 */ vddio_disp_vreg: regulator-vddio-disp { compatible = "regulator-fixed"; regulator-name = "vddio_disp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; vin-supply = <&pm8226_l8>; startup-delay-us = <300>;
After some digging in downstream sources, it was found that the vddio_disp regulator's output voltage is 1.8V. This is further confirmed by the troubleshooting guide. Specify its output voltage as such. While at it, add a comment specifying the IC, which according to the schematic is the TI TPS22902. Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts | 3 +++ 1 file changed, 3 insertions(+)