diff mbox series

[v2,3/3] scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path

Message ID 20250507074415.2451940-4-quic_ziqichen@quicinc.com
State New
Headers show
Series Bug fixes for UFS multi-frequency scaling on Qcom platform | expand

Commit Message

Ziqi Chen May 7, 2025, 7:44 a.m. UTC 
From: Can Guo <quic_cang@quicinc.com>

ufs_qcom_cfg_timers() is clock freq dependent like ufs_qcom_set_core_clk_
ctrl(), hence move ufs_qcom_cfg_timers() call to clock scaling path. In
addition, do not assume the devfreq OPP freq is always the 'core_clock'
freq although 'core_clock' is the first clock phandle in device tree, use
ufs_qcom_opp_freq_to_clk_freq() to find the core clk freq.

Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
---
 drivers/ufs/host/ufs-qcom.c | 49 ++++++++++++++++++++++---------------
 1 file changed, 29 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 804c8ccd8d03..e8fabf4a6d8a 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -599,13 +599,14 @@  static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
  *
  * @hba: host controller instance
  * @is_pre_scale_up: flag to check if pre scale up condition.
+ * @freq: target opp freq
  * Return: zero for success and non-zero in case of a failure.
  */
-static int ufs_qcom_cfg_timers(struct ufs_hba *hba, bool is_pre_scale_up)
+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, bool is_pre_scale_up, unsigned long freq)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct ufs_clk_info *clki;
-	unsigned long core_clk_rate = 0;
+	unsigned long clk_freq = 0;
 	u32 core_clk_cycles_per_us;
 
 	/*
@@ -617,22 +618,34 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, bool is_pre_scale_up)
 	if (host->hw_ver.major < 4 && !ufshcd_is_intr_aggr_allowed(hba))
 		return 0;
 
+	if (hba->use_pm_opp) {
+		clk_freq = ufs_qcom_opp_freq_to_clk_freq(hba, freq, "core_clk");
+		if (clk_freq)
+			goto cfg_timers;
+	}
+
 	list_for_each_entry(clki, &hba->clk_list_head, list) {
 		if (!strcmp(clki->name, "core_clk")) {
+			if (freq == ULONG_MAX) {
+				clk_freq = clki->max_freq;
+				break;
+			}
+
 			if (is_pre_scale_up)
-				core_clk_rate = clki->max_freq;
+				clk_freq = clki->max_freq;
 			else
-				core_clk_rate = clk_get_rate(clki->clk);
+				clk_freq = clk_get_rate(clki->clk);
 			break;
 		}
 
 	}
 
+cfg_timers:
 	/* If frequency is smaller than 1MHz, set to 1MHz */
-	if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
-		core_clk_rate = DEFAULT_CLK_RATE_HZ;
+	if (clk_freq < DEFAULT_CLK_RATE_HZ)
+		clk_freq = DEFAULT_CLK_RATE_HZ;
 
-	core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
+	core_clk_cycles_per_us = clk_freq / USEC_PER_SEC;
 	if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
 		ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
 		/*
@@ -652,7 +665,7 @@  static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
 
 	switch (status) {
 	case PRE_CHANGE:
-		if (ufs_qcom_cfg_timers(hba, false)) {
+		if (ufs_qcom_cfg_timers(hba, false, ULONG_MAX)) {
 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
 				__func__);
 			return -EINVAL;
@@ -930,17 +943,6 @@  static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 
 		break;
 	case POST_CHANGE:
-		if (ufs_qcom_cfg_timers(hba, false)) {
-			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
-				__func__);
-			/*
-			 * we return error code at the end of the routine,
-			 * but continue to configure UFS_PHY_TX_LANE_ENABLE
-			 * and bus voting as usual
-			 */
-			ret = -EINVAL;
-		}
-
 		/* cache the power mode parameters to use internally */
 		memcpy(&host->dev_req_params,
 				dev_req_params, sizeof(*dev_req_params));
@@ -1492,7 +1494,7 @@  static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba, unsigned long f
 {
 	int ret;
 
-	ret = ufs_qcom_cfg_timers(hba, true);
+	ret = ufs_qcom_cfg_timers(hba, true, freq);
 	if (ret) {
 		dev_err(hba->dev, "%s ufs cfg timer failed\n", __func__);
 		return ret;
@@ -1529,6 +1531,13 @@  static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
 
 static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba, unsigned long freq)
 {
+	int ret;
+
+	ret = ufs_qcom_cfg_timers(hba, false, freq);
+	if (ret) {
+		dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",	__func__);
+		return ret;
+	}
 	/* set unipro core clock attributes and clear clock divider */
 	return ufs_qcom_set_core_clk_ctrl(hba, false, freq);
 }