diff mbox series

[PATCHv2,net-next,4/6] selftests: net: use setup_ns for SRv6 tests and remove rp_filter configuration

Message ID 20250508081910.84216-5-liuhangbin@gmail.com
State New
Headers show
Series selftests: net: configure rp_filter in setup_ns | expand

Commit Message

Hangbin Liu May 8, 2025, 8:19 a.m. UTC 
Some SRv6 tests manually set up network namespaces and disable rp_filter.
Since the setup_ns library function already handles rp_filter configuration,
convert these SRv6 tests to use setup_ns and remove the redundant rp_filter
settings.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 .../selftests/net/srv6_end_dt46_l3vpn_test.sh |  5 --
 .../selftests/net/srv6_end_dt4_l3vpn_test.sh  |  5 --
 .../net/srv6_end_next_csid_l3vpn_test.sh      | 77 ++++-------------
 .../net/srv6_end_x_next_csid_l3vpn_test.sh    | 83 +++++--------------
 .../net/srv6_hencap_red_l3vpn_test.sh         | 74 ++++-------------
 .../net/srv6_hl2encap_red_l2vpn_test.sh       | 83 +++++--------------
 6 files changed, 76 insertions(+), 251 deletions(-)
diff mbox series

Patch

diff --git a/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
index 02d617040793..a5e959a080bb 100755
--- a/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
@@ -285,11 +285,6 @@  setup_hs()
 	ip netns exec ${hsname} sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec ${hsname} sysctl -wq net.ipv6.conf.default.accept_dad=0
 
-	# disable the rp_filter otherwise the kernel gets confused about how
-	# to route decap ipv4 packets.
-	ip netns exec ${rtname} sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec ${rtname} sysctl -wq net.ipv4.conf.default.rp_filter=0
-
 	ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
 	ip -netns ${hsname} link set ${rtveth} netns ${rtname}
 	ip -netns ${hsname} addr add ${IPv6_HS_NETWORK}::${hid}/64 dev veth0 nodad
diff --git a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
index 79fb81e63c59..a649dba3cb77 100755
--- a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
@@ -250,11 +250,6 @@  setup_hs()
 	eval local rtname=\${rt_${rid}}
 	local rtveth=veth-t${tid}
 
-	# disable the rp_filter otherwise the kernel gets confused about how
-	# to route decap ipv4 packets.
-	ip netns exec ${rtname} sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec ${rtname} sysctl -wq net.ipv4.conf.default.rp_filter=0
-
 	ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
 	ip -netns ${hsname} link set ${rtveth} netns ${rtname}
 	ip -netns ${hsname} addr add ${IPv4_HS_NETWORK}.${hid}/24 dev veth0
diff --git a/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh
index 87e414cc417c..ba730655a7bf 100755
--- a/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_next_csid_l3vpn_test.sh
@@ -245,10 +245,8 @@ 
 # that adopted in the use cases already examined (of course, it is necessary to
 # consider the different SIDs/C-SIDs).
 
-# Kselftest framework requirement - SKIP code is 4.
-readonly ksft_skip=4
+source lib.sh
 
-readonly RDMSUFF="$(mktemp -u XXXXXXXX)"
 readonly DUMMY_DEVNAME="dum0"
 readonly VRF_TID=100
 readonly VRF_DEVNAME="vrf-${VRF_TID}"
@@ -376,32 +374,18 @@  test_command_or_ksft_skip()
 	fi
 }
 
-get_nodename()
-{
-	local name="$1"
-
-	echo "${name}-${RDMSUFF}"
-}
-
 get_rtname()
 {
 	local rtid="$1"
 
-	get_nodename "rt-${rtid}"
+	echo "rt_${rtid}"
 }
 
 get_hsname()
 {
 	local hsid="$1"
 
-	get_nodename "hs-${hsid}"
-}
-
-__create_namespace()
-{
-	local name="$1"
-
-	ip netns add "${name}"
+	echo "hs_${hsid}"
 }
 
 create_router()
@@ -410,8 +394,7 @@  create_router()
 	local nsname
 
 	nsname="$(get_rtname "${rtid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 create_host()
@@ -420,28 +403,12 @@  create_host()
 	local nsname
 
 	nsname="$(get_hsname "${hsid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 cleanup()
 {
-	local nsname
-	local i
-
-	# destroy routers
-	for i in ${ROUTERS}; do
-		nsname="$(get_rtname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
-
-	# destroy hosts
-	for i in ${HOSTS}; do
-		nsname="$(get_hsname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
+	cleanup_all_ns
 
 	# check whether the setup phase was completed successfully or not. In
 	# case of an error during the setup phase of the testing environment,
@@ -462,10 +429,10 @@  add_link_rt_pairs()
 	local nsname
 	local neigh_nsname
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
-		neigh_nsname="$(get_rtname "${neigh}")"
+		eval neigh_nsname=\${$(get_rtname "${neigh}")}
 
 		ip link add "veth-rt-${rt}-${neigh}" netns "${nsname}" \
 			type veth peer name "veth-rt-${neigh}-${rt}" \
@@ -497,7 +464,7 @@  setup_rt_networking()
 	local devname
 	local neigh
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -518,9 +485,6 @@  setup_rt_networking()
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.forwarding=1
-
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.default.rp_filter=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv4.ip_forward=1
 }
 
@@ -596,7 +560,7 @@  setup_rt_local_sids()
 	local lcnode_func_prefix
 	local lcblock_prefix
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -668,8 +632,8 @@  __setup_l3vpn()
 	local rtsrc_nsname
 	local rtdst_nsname
 
-	rtsrc_nsname="$(get_rtname "${src}")"
-	rtdst_nsname="$(get_rtname "${dst}")"
+	eval rtsrc_nsname=\${$(get_rtname "${src}")}
+	eval rtdst_nsname=\${$(get_rtname "${dst}")}
 
 	container="${LCBLOCK_ADDR}"
 
@@ -744,8 +708,8 @@  setup_hs()
 	local hsname
 	local rtname
 
-	hsname="$(get_hsname "${hs}")"
-	rtname="$(get_rtname "${rt}")"
+	eval hsname=\${$(get_hsname "${hs}")}
+	eval rtname=\${$(get_rtname "${rt}")}
 
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
@@ -791,11 +755,6 @@  setup_hs()
 	ip netns exec "${rtname}" \
 		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".proxy_arp=1
 
-	# disable the rp_filter otherwise the kernel gets confused about how
-	# to route decap ipv4 packets.
-	ip netns exec "${rtname}" \
-		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".rp_filter=0
-
 	ip netns exec "${rtname}" sh -c "echo 1 > /proc/sys/net/vrf/strict_mode"
 }
 
@@ -880,7 +839,7 @@  check_rt_connectivity()
 	local prefix
 	local rtsrc_nsname
 
-	rtsrc_nsname="$(get_rtname "${rtsrc}")"
+	eval rtsrc_nsname=\${$(get_rtname "${rtsrc}")}
 
 	prefix="$(get_network_prefix "${rtsrc}" "${rtdst}")"
 
@@ -903,7 +862,7 @@  check_hs_ipv6_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv6_HS_NETWORK}::${hsdst}" >/dev/null 2>&1
@@ -915,7 +874,7 @@  check_hs_ipv4_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv4_HS_NETWORK}.${hsdst}" >/dev/null 2>&1
@@ -1025,7 +984,7 @@  rt_x_nextcsid_end_behavior_test()
 	local nsname
 	local ret
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	__nextcsid_end_behavior_test "${nsname}" "add" "${blen}" "${flen}"
 	ret="$?"
diff --git a/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh
index c79cb8ede17f..4b86040c58c6 100755
--- a/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_x_next_csid_l3vpn_test.sh
@@ -287,10 +287,8 @@ 
 # packet using the SRv6 End.DT46 behavior (associated with the SID fcff:1::d46)
 # and sends it to the host hs-1.
 
-# Kselftest framework requirement - SKIP code is 4.
-readonly ksft_skip=4
+source lib.sh
 
-readonly RDMSUFF="$(mktemp -u XXXXXXXX)"
 readonly DUMMY_DEVNAME="dum0"
 readonly VRF_TID=100
 readonly VRF_DEVNAME="vrf-${VRF_TID}"
@@ -418,32 +416,18 @@  test_command_or_ksft_skip()
 	fi
 }
 
-get_nodename()
-{
-	local name="$1"
-
-	echo "${name}-${RDMSUFF}"
-}
-
 get_rtname()
 {
 	local rtid="$1"
 
-	get_nodename "rt-${rtid}"
+	echo "rt_${rtid}"
 }
 
 get_hsname()
 {
 	local hsid="$1"
 
-	get_nodename "hs-${hsid}"
-}
-
-__create_namespace()
-{
-	local name="$1"
-
-	ip netns add "${name}"
+	echo "hs_${hsid}"
 }
 
 create_router()
@@ -452,15 +436,12 @@  create_router()
 	local nsname
 
 	nsname="$(get_rtname "${rtid}")"
+	setup_ns "${nsname}"
 
-	__create_namespace "${nsname}"
-
+	eval nsname=\${$(get_rtname "${rtid}")}
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.forwarding=1
-
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.default.rp_filter=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv4.ip_forward=1
 }
 
@@ -470,29 +451,12 @@  create_host()
 	local nsname
 
 	nsname="$(get_hsname "${hsid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 cleanup()
 {
-	local nsname
-	local i
-
-	# destroy routers
-	for i in ${ROUTERS}; do
-		nsname="$(get_rtname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
-
-	# destroy hosts
-	for i in ${HOSTS}; do
-		nsname="$(get_hsname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
-
+	cleanup_all_ns
 	# check whether the setup phase was completed successfully or not. In
 	# case of an error during the setup phase of the testing environment,
 	# the selftest is considered as "skipped".
@@ -512,10 +476,10 @@  add_link_rt_pairs()
 	local nsname
 	local neigh_nsname
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
-		neigh_nsname="$(get_rtname "${neigh}")"
+		eval neigh_nsname=\${$(get_rtname "${neigh}")}
 
 		ip link add "veth-rt-${rt}-${neigh}" netns "${nsname}" \
 			type veth peer name "veth-rt-${neigh}-${rt}" \
@@ -547,7 +511,7 @@  setup_rt_networking()
 	local devname
 	local neigh
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -631,7 +595,7 @@  set_end_x_nextcsid()
 	local rt="$1"
 	local adj="$2"
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 	net_prefix="$(get_network_prefix "${rt}" "${adj}")"
 	lcnode_func_prefix="$(build_lcnode_func_prefix "${rt}")"
 
@@ -650,7 +614,7 @@  set_underlay_sids_reachability()
 	local rt="$1"
 	local rt_neighs="$2"
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -685,7 +649,7 @@  setup_rt_local_sids()
 	local lcnode_func_prefix
 	local lcblock_prefix
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
         set_underlay_sids_reachability "${rt}" "${rt_neighs}"
 
@@ -728,8 +692,8 @@  __setup_l3vpn()
 	local rtsrc_nsname
 	local rtdst_nsname
 
-	rtsrc_nsname="$(get_rtname "${src}")"
-	rtdst_nsname="$(get_rtname "${dst}")"
+	eval rtsrc_nsname=\${$(get_rtname "${src}")}
+	eval rtdst_nsname=\${$(get_rtname "${dst}")}
 
 	container="${LCBLOCK_ADDR}"
 
@@ -804,8 +768,8 @@  setup_hs()
 	local hsname
 	local rtname
 
-	hsname="$(get_hsname "${hs}")"
-	rtname="$(get_rtname "${rt}")"
+	eval hsname=\${$(get_hsname "${hs}")}
+	eval rtname=\${$(get_rtname "${rt}")}
 
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
@@ -851,11 +815,6 @@  setup_hs()
 	ip netns exec "${rtname}" \
 		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".proxy_arp=1
 
-	# disable the rp_filter otherwise the kernel gets confused about how
-	# to route decap ipv4 packets.
-	ip netns exec "${rtname}" \
-		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".rp_filter=0
-
 	ip netns exec "${rtname}" sh -c "echo 1 > /proc/sys/net/vrf/strict_mode"
 }
 
@@ -947,7 +906,7 @@  check_rt_connectivity()
 	local prefix
 	local rtsrc_nsname
 
-	rtsrc_nsname="$(get_rtname "${rtsrc}")"
+	eval rtsrc_nsname=\${$(get_rtname "${rtsrc}")}
 
 	prefix="$(get_network_prefix "${rtsrc}" "${rtdst}")"
 
@@ -970,7 +929,7 @@  check_hs_ipv6_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv6_HS_NETWORK}::${hsdst}" >/dev/null 2>&1
@@ -982,7 +941,7 @@  check_hs_ipv4_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv4_HS_NETWORK}.${hsdst}" >/dev/null 2>&1
@@ -1093,7 +1052,7 @@  rt_x_nextcsid_end_x_behavior_test()
 	local nsname
 	local ret
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	__nextcsid_end_x_behavior_test "${nsname}" "add" "${blen}" "${flen}"
 	ret="$?"
diff --git a/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh b/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh
index 28a775654b92..3efce1718c5f 100755
--- a/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh
@@ -166,10 +166,8 @@ 
 #  hs-4->hs-3 |IPv6 DA=fcff:1::e|SRH SIDs=fcff:3::d46|IPv6|...| (i.d)
 #
 
-# Kselftest framework requirement - SKIP code is 4.
-readonly ksft_skip=4
+source lib.sh
 
-readonly RDMSUFF="$(mktemp -u XXXXXXXX)"
 readonly VRF_TID=100
 readonly VRF_DEVNAME="vrf-${VRF_TID}"
 readonly RT2HS_DEVNAME="veth-t${VRF_TID}"
@@ -248,32 +246,18 @@  test_command_or_ksft_skip()
 	fi
 }
 
-get_nodename()
-{
-	local name="$1"
-
-	echo "${name}-${RDMSUFF}"
-}
-
 get_rtname()
 {
 	local rtid="$1"
 
-	get_nodename "rt-${rtid}"
+	echo "rt_${rtid}"
 }
 
 get_hsname()
 {
 	local hsid="$1"
 
-	get_nodename "hs-${hsid}"
-}
-
-__create_namespace()
-{
-	local name="$1"
-
-	ip netns add "${name}"
+	echo "hs_${hsid}"
 }
 
 create_router()
@@ -282,8 +266,7 @@  create_router()
 	local nsname
 
 	nsname="$(get_rtname "${rtid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 create_host()
@@ -292,29 +275,12 @@  create_host()
 	local nsname
 
 	nsname="$(get_hsname "${hsid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 cleanup()
 {
-	local nsname
-	local i
-
-	# destroy routers
-	for i in ${ROUTERS}; do
-		nsname="$(get_rtname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
-
-	# destroy hosts
-	for i in ${HOSTS}; do
-		nsname="$(get_hsname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
-
+	cleanup_all_ns
 	# check whether the setup phase was completed successfully or not. In
 	# case of an error during the setup phase of the testing environment,
 	# the selftest is considered as "skipped".
@@ -334,10 +300,10 @@  add_link_rt_pairs()
 	local nsname
 	local neigh_nsname
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
-		neigh_nsname="$(get_rtname "${neigh}")"
+		eval neigh_nsname=\${$(get_rtname "${neigh}")}
 
 		ip link add "veth-rt-${rt}-${neigh}" netns "${nsname}" \
 			type veth peer name "veth-rt-${neigh}-${rt}" \
@@ -369,7 +335,7 @@  setup_rt_networking()
 	local devname
 	local neigh
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -387,9 +353,6 @@  setup_rt_networking()
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.forwarding=1
-
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.default.rp_filter=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv4.ip_forward=1
 }
 
@@ -403,7 +366,7 @@  setup_rt_local_sids()
 	local nsname
 	local neigh
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -469,7 +432,7 @@  __setup_rt_policy()
 	local policy=''
 	local n
 
-	nsname="$(get_rtname "${encap_rt}")"
+	eval nsname=\${$(get_rtname "${encap_rt}")}
 
 	for n in ${end_rts}; do
 		policy="${policy}${VPN_LOCATOR_SERVICE}:${n}::${END_FUNC},"
@@ -516,8 +479,8 @@  setup_hs()
 	local hsname
 	local rtname
 
-	hsname="$(get_hsname "${hs}")"
-	rtname="$(get_rtname "${rt}")"
+	eval hsname=\${$(get_hsname "${hs}")}
+	eval rtname=\${$(get_rtname "${rt}")}
 
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
@@ -555,11 +518,6 @@  setup_hs()
 	ip netns exec "${rtname}" \
 		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".proxy_arp=1
 
-	# disable the rp_filter otherwise the kernel gets confused about how
-	# to route decap ipv4 packets.
-	ip netns exec "${rtname}" \
-		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".rp_filter=0
-
 	ip netns exec "${rtname}" sh -c "echo 1 > /proc/sys/net/vrf/strict_mode"
 }
 
@@ -656,7 +614,7 @@  check_rt_connectivity()
 	local prefix
 	local rtsrc_nsname
 
-	rtsrc_nsname="$(get_rtname "${rtsrc}")"
+	eval rtsrc_nsname=\${$(get_rtname "${rtsrc}")}
 
 	prefix="$(get_network_prefix "${rtsrc}" "${rtdst}")"
 
@@ -679,7 +637,7 @@  check_hs_ipv6_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv6_HS_NETWORK}::${hsdst}" >/dev/null 2>&1
@@ -691,7 +649,7 @@  check_hs_ipv4_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv4_HS_NETWORK}.${hsdst}" >/dev/null 2>&1
diff --git a/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh b/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh
index cb4177d41b21..cabc70538ffe 100755
--- a/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh
@@ -116,10 +116,8 @@ 
 #  hs-2->hs-1 |IPv6 DA=fcff:4::e|SRH SIDs=fcff:3::e,fcff:1::d2|eth|...| (i.b)
 #
 
-# Kselftest framework requirement - SKIP code is 4.
-readonly ksft_skip=4
+source lib.sh
 
-readonly RDMSUFF="$(mktemp -u XXXXXXXX)"
 readonly DUMMY_DEVNAME="dum0"
 readonly RT2HS_DEVNAME="veth-hs"
 readonly HS_VETH_NAME="veth0"
@@ -199,32 +197,18 @@  test_command_or_ksft_skip()
 	fi
 }
 
-get_nodename()
-{
-	local name="$1"
-
-	echo "${name}-${RDMSUFF}"
-}
-
 get_rtname()
 {
 	local rtid="$1"
 
-	get_nodename "rt-${rtid}"
+	echo "rt_${rtid}"
 }
 
 get_hsname()
 {
 	local hsid="$1"
 
-	get_nodename "hs-${hsid}"
-}
-
-__create_namespace()
-{
-	local name="$1"
-
-	ip netns add "${name}"
+	echo "hs_${hsid}"
 }
 
 create_router()
@@ -233,8 +217,7 @@  create_router()
 	local nsname
 
 	nsname="$(get_rtname "${rtid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 create_host()
@@ -243,28 +226,12 @@  create_host()
 	local nsname
 
 	nsname="$(get_hsname "${hsid}")"
-
-	__create_namespace "${nsname}"
+	setup_ns "${nsname}"
 }
 
 cleanup()
 {
-	local nsname
-	local i
-
-	# destroy routers
-	for i in ${ROUTERS}; do
-		nsname="$(get_rtname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
-
-	# destroy hosts
-	for i in ${HOSTS}; do
-		nsname="$(get_hsname "${i}")"
-
-		ip netns del "${nsname}" &>/dev/null || true
-	done
+	cleanup_all_ns
 
 	# check whether the setup phase was completed successfully or not. In
 	# case of an error during the setup phase of the testing environment,
@@ -285,10 +252,10 @@  add_link_rt_pairs()
 	local nsname
 	local neigh_nsname
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
-		neigh_nsname="$(get_rtname "${neigh}")"
+		eval neigh_nsname=\${$(get_rtname "${neigh}")}
 
 		ip link add "veth-rt-${rt}-${neigh}" netns "${nsname}" \
 			type veth peer name "veth-rt-${neigh}-${rt}" \
@@ -320,7 +287,7 @@  setup_rt_networking()
 	local devname
 	local neigh
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -341,9 +308,6 @@  setup_rt_networking()
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.forwarding=1
-
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec "${nsname}" sysctl -wq net.ipv4.conf.default.rp_filter=0
 	ip netns exec "${nsname}" sysctl -wq net.ipv4.ip_forward=1
 }
 
@@ -357,7 +321,7 @@  setup_rt_local_sids()
 	local nsname
 	local neigh
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	for neigh in ${rt_neighs}; do
 		devname="veth-rt-${rt}-${neigh}"
@@ -407,7 +371,7 @@  __setup_rt_policy()
 	local policy=''
 	local n
 
-	nsname="$(get_rtname "${encap_rt}")"
+	eval nsname=\${$(get_rtname "${encap_rt}")}
 
 	for n in ${end_rts}; do
 		policy="${policy}${VPN_LOCATOR_SERVICE}:${n}::${END_FUNC},"
@@ -446,7 +410,7 @@  setup_decap()
 	local rt="$1"
 	local nsname
 
-	nsname="$(get_rtname "${rt}")"
+	eval nsname=\${$(get_rtname "${rt}")}
 
 	# Local End.DX2 behavior
 	ip -netns "${nsname}" -6 route \
@@ -463,8 +427,8 @@  setup_hs()
 	local hsname
 	local rtname
 
-	hsname="$(get_hsname "${hs}")"
-	rtname="$(get_rtname "${rt}")"
+	eval hsname=\${$(get_hsname "${hs}")}
+	eval rtname=\${$(get_rtname "${rt}")}
 
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0
 	ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0
@@ -486,11 +450,6 @@  setup_hs()
 		add "${IPv4_HS_NETWORK}.254/24" dev "${RT2HS_DEVNAME}"
 
 	ip -netns "${rtname}" link set "${RT2HS_DEVNAME}" up
-
-	# disable the rp_filter otherwise the kernel gets confused about how
-	# to route decap ipv4 packets.
-	ip netns exec "${rtname}" \
-		sysctl -wq net.ipv4.conf."${RT2HS_DEVNAME}".rp_filter=0
 }
 
 # set an auto-generated mac address
@@ -508,7 +467,7 @@  set_mac_address()
 	local ifname="$4"
 	local nsname
 
-	nsname=$(get_nodename "${nodename}")
+	eval nsname=\${${nodename}}
 
 	ip -netns "${nsname}" link set dev "${ifname}" down
 
@@ -532,7 +491,7 @@  set_host_l2peer()
 	local hssrc_name
 	local ipaddr
 
-	hssrc_name="$(get_hsname "${hssrc}")"
+	eval hssrc_name=\${$(get_hsname "${hssrc}")}
 
 	if [ "${proto}" -eq 6 ]; then
 		ipaddr="${ipprefix}::${hsdst}"
@@ -562,7 +521,7 @@  setup_l2vpn()
 	local rtdst="${hsdst}"
 
 	# set fixed mac for source node and the neigh MAC address
-	set_mac_address "hs-${hssrc}" "${hssrc}" "${hssrc}" "${HS_VETH_NAME}"
+	set_mac_address "hs_${hssrc}" "${hssrc}" "${hssrc}" "${HS_VETH_NAME}"
 	set_host_l2peer "${hssrc}" "${hsdst}" "${IPv6_HS_NETWORK}" 6
 	set_host_l2peer "${hssrc}" "${hsdst}" "${IPv4_HS_NETWORK}" 4
 
@@ -570,7 +529,7 @@  setup_l2vpn()
 	# to the mac address of the remote peer (L2 VPN destination host).
 	# Otherwise, traffic coming from the source host is dropped at the
 	# ingress router.
-	set_mac_address "rt-${rtsrc}" "${hsdst}" 254 "${RT2HS_DEVNAME}"
+	set_mac_address "rt_${rtsrc}" "${hsdst}" 254 "${RT2HS_DEVNAME}"
 
 	# set the SRv6 Policies at the ingress router
 	setup_rt_policy_ipv6 "${hsdst}" "${rtsrc}" "${end_rts}" "${rtdst}" \
@@ -647,7 +606,7 @@  check_rt_connectivity()
 	local prefix
 	local rtsrc_nsname
 
-	rtsrc_nsname="$(get_rtname "${rtsrc}")"
+	eval rtsrc_nsname=\${$(get_rtname "${rtsrc}")}
 
 	prefix="$(get_network_prefix "${rtsrc}" "${rtdst}")"
 
@@ -670,7 +629,7 @@  check_hs_ipv6_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv6_HS_NETWORK}::${hsdst}" >/dev/null 2>&1
@@ -682,7 +641,7 @@  check_hs_ipv4_connectivity()
 	local hsdst="$2"
 	local hssrc_nsname
 
-	hssrc_nsname="$(get_hsname "${hssrc}")"
+	eval hssrc_nsname=\${$(get_hsname "${hssrc}")}
 
 	ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \
 		"${IPv4_HS_NETWORK}.${hsdst}" >/dev/null 2>&1