diff mbox series

[2/2] spi: spi-qpic-snand: extend FIELD_PREP() macro usage

Message ID 20250515-qpic-snand-use-bitmasks-v1-2-11729aeae73b@gmail.com
State New
Headers show
Series spi: spi-qpic-snand: extend bitmasks usage | expand

Commit Message

Gabor Juhos May 15, 2025, 6:58 p.m. UTC 
Large part of the code uses the FIELD_PREP() macro already to construct
values to be written to hardware registers. Change the code to use also
the macro for more registers of which the corresponding bitmasks are
defined already.

This makes the code more readable. It also syncs the affected
codes with their counterparts in the 'qcom_nandc' driver, so it
makes it easier to spot the differences between the two
implementations.

No functional changes intended.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
---
 drivers/spi/spi-qpic-snand.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-qpic-snand.c b/drivers/spi/spi-qpic-snand.c
index bc45b834fadc5456eda1fe778e5ca8b16177465e..ad01bb456a88b54f0ffc801dd14eb3fa2708ec2e 100644
--- a/drivers/spi/spi-qpic-snand.c
+++ b/drivers/spi/spi-qpic-snand.c
@@ -130,9 +130,9 @@  static void qcom_spi_set_read_loc_first(struct qcom_nand_controller *snandc,
 					int is_last_read_loc)
 {
 	__le32 locreg_val;
-	u32 val = (((cw_offset) << READ_LOCATION_OFFSET) |
-		  ((read_size) << READ_LOCATION_SIZE) | ((is_last_read_loc)
-		  << READ_LOCATION_LAST));
+	u32 val = FIELD_PREP(READ_LOCATION_OFFSET_MASK, cw_offset) |
+		  FIELD_PREP(READ_LOCATION_SIZE_MASK, read_size) |
+		  FIELD_PREP(READ_LOCATION_LAST_MASK, is_last_read_loc);
 
 	locreg_val = cpu_to_le32(val);
 
@@ -151,9 +151,9 @@  static void qcom_spi_set_read_loc_last(struct qcom_nand_controller *snandc,
 				       int is_last_read_loc)
 {
 	__le32 locreg_val;
-	u32 val = (((cw_offset) << READ_LOCATION_OFFSET) |
-		  ((read_size) << READ_LOCATION_SIZE) | ((is_last_read_loc)
-		  << READ_LOCATION_LAST));
+	u32 val = FIELD_PREP(READ_LOCATION_OFFSET_MASK, cw_offset) |
+		  FIELD_PREP(READ_LOCATION_SIZE_MASK, read_size) |
+		  FIELD_PREP(READ_LOCATION_LAST_MASK, is_last_read_loc);
 
 	locreg_val = cpu_to_le32(val);
 
@@ -352,7 +352,7 @@  static int qcom_spi_ecc_init_ctx_pipelined(struct nand_device *nand)
 			       FIELD_PREP(ECC_MODE_MASK, 0) |
 			       FIELD_PREP(ECC_PARITY_SIZE_BYTES_BCH_MASK, ecc_cfg->ecc_bytes_hw);
 
-	ecc_cfg->ecc_buf_cfg = 0x203 << NUM_STEPS;
+	ecc_cfg->ecc_buf_cfg = FIELD_PREP(NUM_STEPS_MASK, 0x203);
 	ecc_cfg->clrflashstatus = FS_READY_BSY_N;
 	ecc_cfg->clrreadstatus = 0xc0;