@@ -31,7 +31,7 @@ static int group_constraint_cache(void)
/* Check for platform support for the test */
SKIP_IF(platform_check_for_tests());
- /* Init the events for the group contraint check for l1 cache select bits */
+ /* Init the events for the group constraint check for l1 cache select bits */
event_init(&leader, EventCode_1);
FAIL_IF(event_open(&leader));
@@ -42,7 +42,7 @@ static int group_constraint_cache(void)
event_close(&event);
- /* Init the event for the group contraint l1 cache select test */
+ /* Init the event for the group constraint l1 cache select test */
event_init(&event, EventCode_3);
/* Expected to succeed as sibling event request same l1 cache select bits as leader */
@@ -30,12 +30,12 @@ static int group_constraint_l2l3_sel(void)
/*
* Check for platform support for the test.
- * This test is only aplicable on ISA v3.1
+ * This test is only applicable on ISA v3.1
*/
SKIP_IF(platform_check_for_tests());
SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1));
- /* Init the events for the group contraint check for l2l3_sel bits */
+ /* Init the events for the group constraint check for l2l3_sel bits */
event_init(&leader, EventCode_1);
FAIL_IF(event_open(&leader));
@@ -46,7 +46,7 @@ static int group_constraint_l2l3_sel(void)
event_close(&event);
- /* Init the event for the group contraint l2l3_sel test */
+ /* Init the event for the group constraint l2l3_sel test */
event_init(&event, EventCode_3);
/* Expected to succeed as sibling event request same l2l3_sel bits as leader */
@@ -26,12 +26,12 @@ static int group_constraint_radix_scope_qual(void)
/*
* Check for platform support for the test.
- * This test is aplicable on ISA v3.1 only.
+ * This test is applicable on ISA v3.1 only.
*/
SKIP_IF(platform_check_for_tests());
SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1));
- /* Init the events for the group contraint check for radix_scope_qual bits */
+ /* Init the events for the group constraint check for radix_scope_qual bits */
event_init(&leader, EventCode_1);
FAIL_IF(event_open(&leader));
@@ -37,7 +37,7 @@ static int group_constraint_thresh_cmp(void)
SKIP_IF(platform_check_for_tests());
if (have_hwcap2(PPC_FEATURE2_ARCH_3_1)) {
- /* Init the events for the group contraint check for thresh_cmp bits */
+ /* Init the events for the group constraint check for thresh_cmp bits */
event_init(&leader, p10_EventCode_1);
/* Add the thresh_cmp value for leader in config1 */
@@ -54,7 +54,7 @@ static int group_constraint_thresh_cmp(void)
event_close(&event);
- /* Init the event for the group contraint thresh compare test */
+ /* Init the event for the group constraint thresh compare test */
event_init(&event, p10_EventCode_2);
/* Add the same thresh_cmp value for leader and sibling event in config1 */
@@ -66,7 +66,7 @@ static int group_constraint_thresh_cmp(void)
event_close(&leader);
event_close(&event);
} else {
- /* Init the events for the group contraint check for thresh_cmp bits */
+ /* Init the events for the group constraint check for thresh_cmp bits */
event_init(&leader, p9_EventCode_1);
FAIL_IF(event_open(&leader));
@@ -77,7 +77,7 @@ static int group_constraint_thresh_cmp(void)
event_close(&event);
- /* Init the event for the group contraint thresh compare test */
+ /* Init the event for the group constraint thresh compare test */
event_init(&event, p9_EventCode_3);
/* Expected to succeed as sibling and leader event request same thresh_cmp bits */
@@ -35,7 +35,7 @@ static int group_constraint_thresh_ctl(void)
/* Check for platform support for the test */
SKIP_IF(platform_check_for_tests());
- /* Init the events for the group contraint thresh control test */
+ /* Init the events for the group constraint thresh control test */
event_init(&leader, EventCode_1);
FAIL_IF(event_open(&leader));
@@ -46,7 +46,7 @@ static int group_constraint_thresh_ctl(void)
event_close(&event);
- /* Init the event for the group contraint thresh control test */
+ /* Init the event for the group constraint thresh control test */
event_init(&event, EventCode_3);
/* Expected to succeed as sibling and leader event request same thresh_ctl bits */
@@ -34,7 +34,7 @@ static int group_constraint_thresh_sel(void)
/* Check for platform support for the test */
SKIP_IF(platform_check_for_tests());
- /* Init the events for the group contraint thresh select test */
+ /* Init the events for the group constraint thresh select test */
event_init(&leader, EventCode_1);
FAIL_IF(event_open(&leader));
@@ -45,7 +45,7 @@ static int group_constraint_thresh_sel(void)
event_close(&event);
- /* Init the event for the group contraint thresh select test */
+ /* Init the event for the group constraint thresh select test */
event_init(&event, EventCode_3);
/* Expected to succeed as sibling and leader event request same thresh_sel bits */
@@ -21,7 +21,7 @@
* Testcase for group constraint check of unit and pmc bits which is
* used to program corresponding unit and pmc field in Monitor Mode
* Control Register 1 (MMCR1)
- * One of the event in the group should use PMC 4 incase units field
+ * One of the event in the group should use PMC 4 in case units field
* value is within 6 to 9 otherwise event_open for the group will fail.
*/
static int group_constraint_unit(void)
@@ -37,21 +37,21 @@ static int group_constraint_unit(void)
SKIP_IF(platform_check_for_tests());
SKIP_IF(have_hwcap2(PPC_FEATURE2_ARCH_3_1));
- /* Init the events for the group contraint check for unit bits */
+ /* Init the events for the group constraint check for unit bits */
e = &events[0];
event_init(e, EventCode_1);
/* Expected to fail as PMC 4 is not used with unit field value 6 to 9 */
FAIL_IF(!event_open(&events[0]));
- /* Init the events for the group contraint check for unit bits */
+ /* Init the events for the group constraint check for unit bits */
e = &events[1];
event_init(e, EventCode_2);
/* Expected to pass as PMC 4 is used with unit field value 6 to 9 */
FAIL_IF(event_open(&events[1]));
- /* Init the event for the group contraint unit test */
+ /* Init the event for the group constraint unit test */
e = &events[2];
event_init(e, EventCode_3);
@@ -466,7 +466,7 @@ int get_thresh_cmp_val(struct event event)
return value;
/*
- * Incase of P10, thresh_cmp value is not part of raw event code
+ * In case of P10, thresh_cmp value is not part of raw event code
* and provided via attr.config1 parameter. To program threshold in MMCRA,
* take a 18 bit number N and shift right 2 places and increment
* the exponent E by 1 until the upper 10 bits of N are zero.
@@ -498,7 +498,7 @@ int get_thresh_cmp_val(struct event event)
* by comparing base_platform value from auxv and real
* PVR value.
* auxv_base_platform() func gives information of "base platform"
- * corresponding to PVR value. Incase, if the distro doesn't
+ * corresponding to PVR value. In case, if the distro doesn't
* support platform PVR (missing cputable support), base platform
* in auxv will have a default value other than the real PVR's.
* In this case, ISAv3 PMU (generic compat PMU) will be registered
@@ -29,7 +29,7 @@ static int mmcra_bhrb_cond_test(void)
/*
* Check for platform support for the test.
- * This test is only aplicable on ISA v3.1
+ * This test is only applicable on ISA v3.1
*/
SKIP_IF(check_pvr_for_sampling_tests());
SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1));
@@ -26,7 +26,7 @@ static int mmcra_bhrb_disable_no_branch_test(void)
/*
* Check for platform support for the test.
- * This test is only aplicable on ISA v3.1
+ * This test is only applicable on ISA v3.1
*/
SKIP_IF(check_pvr_for_sampling_tests());
SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1));
@@ -26,7 +26,7 @@ static int mmcra_bhrb_disable_test(void)
/*
* Check for platform support for the test.
- * This test is only aplicable on ISA v3.1
+ * This test is only applicable on ISA v3.1
*/
SKIP_IF(check_pvr_for_sampling_tests());
SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1));
@@ -29,7 +29,7 @@ static int mmcra_bhrb_ind_call_test(void)
/*
* Check for platform support for the test.
- * This test is only aplicable on ISA v3.1
+ * This test is only applicable on ISA v3.1
*/
SKIP_IF(check_pvr_for_sampling_tests());
SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1));
Corrected multiple spelling and grammar issues in the under powerpc PMU selftests: - Corrected 'aplicable' -> 'applicable'. - Corrected 'contraint' -> 'constraint'. - Corrected 'Incase' -> 'In Case'. These changes improve documentation quality and maintain code readability. Signed-off-by: Akshaykumar Gunari <akshaygunari@gmail.com> --- .../pmu/event_code_tests/group_constraint_cache_test.c | 4 ++-- .../pmu/event_code_tests/group_constraint_l2l3_sel_test.c | 6 +++--- .../group_constraint_radix_scope_qual_test.c | 4 ++-- .../event_code_tests/group_constraint_thresh_cmp_test.c | 8 ++++---- .../event_code_tests/group_constraint_thresh_ctl_test.c | 4 ++-- .../event_code_tests/group_constraint_thresh_sel_test.c | 4 ++-- .../pmu/event_code_tests/group_constraint_unit_test.c | 8 ++++---- tools/testing/selftests/powerpc/pmu/sampling_tests/misc.c | 4 ++-- .../powerpc/pmu/sampling_tests/mmcra_bhrb_cond_test.c | 2 +- .../sampling_tests/mmcra_bhrb_disable_no_branch_test.c | 2 +- .../powerpc/pmu/sampling_tests/mmcra_bhrb_disable_test.c | 2 +- .../powerpc/pmu/sampling_tests/mmcra_bhrb_ind_call_test.c | 2 +- 12 files changed, 25 insertions(+), 25 deletions(-)