diff mbox series

[mt76-next,1/9] wifi: mt76: remove capability of partial bandwidth UL MU-MIMO

Message ID 20250515032952.1653494-1-shayne.chen@mediatek.com
State New
Headers show
Series [mt76-next,1/9] wifi: mt76: remove capability of partial bandwidth UL MU-MIMO | expand

Commit Message

Shayne Chen May 15, 2025, 3:29 a.m. UTC 
From: Howard Hsu <howard-yh.hsu@mediatek.com>

The firmware only supports full bandwidth UL MU-MIMO, so remove the
partial bandwidth capability from HE PHY CAP.

Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 3 +--
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 57d5be94624b..be9527dd0269 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -925,8 +925,7 @@  mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
 
 	c = IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US;
 	if (!is_mt7915(&dev->mt76))
-		c |= IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
-		     IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO;
+		c |= IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO;
 	elem->phy_cap_info[2] |= c;
 
 	c = IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE |
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index ff835a6f77ce..b77fa94df8c7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -1116,8 +1116,7 @@  mt7996_set_stream_he_txbf_caps(struct mt7996_phy *phy,
 	elem->phy_cap_info[7] &= ~IEEE80211_HE_PHY_CAP7_MAX_NC_MASK;
 
 	c = IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
-	    IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
-	    IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO;
+	    IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO;
 	elem->phy_cap_info[2] |= c;
 
 	c = IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE;