diff mbox series

arm64: dts: qcom: qcs8300: Add support for camss

Message ID 20250520-qcs8300-camss-v1-1-1dfcb2e3bf93@quicinc.com
State New
Headers show
Series arm64: dts: qcom: qcs8300: Add support for camss | expand

Commit Message

Wenmeng Liu May 20, 2025, 9:40 a.m. UTC 
This change enables camera driver for QCS8300 RIDE board.

---
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
---
This patch series depends on patch series:
- https://lore.kernel.org/all/20250214095611.2498950-1-quic_vikramsa@quicinc.com/
- https://lore.kernel.org/all/20250211-sa8775p_tpg-v1-1-3f76c5f8431f@quicinc.com/
- https://lore.kernel.org/all/20250217-qcs8300_tpg-v1-1-6e0f4dd3ad1f@quicinc.com/
- https://lore.kernel.org/all/20250214094747.2483058-1-quic_vikramsa@quicinc.com/
---
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 4 ++++
 1 file changed, 4 insertions(+)


---
base-commit: b16751cc36fc42deedf4726683423e19939c1044
change-id: 20250520-qcs8300-camss-ffc2032c365a

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 3ff8f398cad31a36fa46060855b075c8c2020aa7..97281d6d7376a406e5c31466e175358b10441256 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -207,6 +207,10 @@  vreg_l9c: ldo9 {
 	};
 };
 
+&camss {
+	status = "ok";
+};
+
 &ethernet0 {
 	phy-mode = "2500base-x";
 	phy-handle = <&phy0>;