diff mbox series

[1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46

Message ID 20250527222040.32000-2-ansuelsmth@gmail.com
State New
Headers show
Series [1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46 | expand

Commit Message

Christian Marangi May 27, 2025, 10:20 p.m. UTC 
In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where
the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK.

This wasn't notice as there were no board that made use of the
secondary PHY LED but looking at the internal Documentation the actual
value should be LED1_MODE_MASK similar to the other GPIO entry.

Fix the wrong value to apply the correct MUX configuration.

Cc: stable@vger.kernel.org
Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/pinctrl/mediatek/pinctrl-airoha.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c
index b97b28ebb37a..8ef7f88477aa 100644
--- a/drivers/pinctrl/mediatek/pinctrl-airoha.c
+++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c
@@ -1752,8 +1752,8 @@  static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
@@ -1816,8 +1816,8 @@  static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
@@ -1880,8 +1880,8 @@  static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
@@ -1944,8 +1944,8 @@  static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,