| Message ID | 20250529081949.26493-2-quic_songchai@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Provides support for Trigger Generation Unit | expand |
On Thu, 29 May 2025 16:19:42 +0800, Songwei Chai wrote: > The Trigger Generation Unit (TGU) is designed to detect patterns or > sequences within a specific region of the System on Chip (SoC). Once > configured and activated, it monitors sense inputs and can detect a > pre-programmed state or sequence across clock cycles, subsequently > producing a trigger. > > TGU configuration space > offset table > x-------------------------x > | | > | | > | | Step configuration > | | space layout > | coresight management | x-------------x > | registers | |---> | | > | | | | reserve | > | | | | | > |-------------------------| | |-------------| > | | | | priority[3] | > | step[7] |<-- | |-------------| > |-------------------------| | | | priority[2] | > | | | | |-------------| > | ... | |Steps region | | priority[1] | > | | | | |-------------| > |-------------------------| | | | priority[0] | > | |<-- | |-------------| > | step[0] |--------------------> | | > |-------------------------| | condition | > | | | | > | control and status | x-------------x > | space | | | > x-------------------------x |Timer/Counter| > | | > x-------------x > TGU Configuration in Hardware > > The TGU provides a step region for user configuration, similar > to a flow chart. Each step region consists of three register clusters: > > 1.Priority Region: Sets the required signals with priority. > 2.Condition Region: Defines specific requirements (e.g., signal A > reaches three times) and the subsequent action once the requirement is > met. > 3.Timer/Counter (Optional): Provides timing or counting functionality. > > Add a new coresight-tgu.yaml file to describe the bindings required to > define the TGU in the device trees. > > Signed-off-by: Songwei Chai <quic_songchai@quicinc.com> > --- > .../bindings/arm/qcom,coresight-tgu.yaml | 92 +++++++++++++++++++ > 1 file changed, 92 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tgu.yaml > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tgu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tgu.yaml new file mode 100644 index 000000000000..3576d3871126 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tgu.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom,coresight-tgu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trigger Generation Unit - TGU + +description: | + The Trigger Generation Unit (TGU) is a Data Engine which can be utilized + to sense a plurality of signals and create a trigger into the CTI or + generate interrupts to processors. The TGU is like the trigger circuit + of a Logic Analyzer. The corresponding trigger logic can be realized by + configuring the conditions for each step after sensing the signal. + Once setup and enabled, it will observe sense inputs and based upon + the activity of those inputs, even over clock cycles, may detect a + preprogrammed state/sequence and then produce a trigger or interrupt. + + The primary use case of the TGU is to detect patterns or sequences on a + given set of signals within some region to indentify the issue in time + once there is abnormal behavior in the subsystem. + +maintainers: + - Mao Jinlong <quic_jinlmao@quicinc.com> + - Sam Chai <quic_songchai@quicinc.com> + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - qcom,coresight-tgu + required: + - compatible + +properties: + compatible: + items: + - const: qcom,coresight-tgu + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: + The port mechanism here ensures the relationship between TGU and + TPDM, as TPDM is one of the inputs for TGU. It will allow TGU to + function as TPDM's helper and enable TGU when the connected + TPDM is enabled. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + tgu@10b0e000 { + compatible = "qcom,coresight-tgu", "arm,primecell"; + reg = <0x10b0e000 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tgu_in_tpdm_swao: endpoint{ + remote-endpoint = <&tpdm_swao_out_tgu>; + }; + }; + }; + }; +...
The Trigger Generation Unit (TGU) is designed to detect patterns or sequences within a specific region of the System on Chip (SoC). Once configured and activated, it monitors sense inputs and can detect a pre-programmed state or sequence across clock cycles, subsequently producing a trigger. TGU configuration space offset table x-------------------------x | | | | | | Step configuration | | space layout | coresight management | x-------------x | registers | |---> | | | | | | reserve | | | | | | |-------------------------| | |-------------| | | | | priority[3] | | step[7] |<-- | |-------------| |-------------------------| | | | priority[2] | | | | | |-------------| | ... | |Steps region | | priority[1] | | | | | |-------------| |-------------------------| | | | priority[0] | | |<-- | |-------------| | step[0] |--------------------> | | |-------------------------| | condition | | | | | | control and status | x-------------x | space | | | x-------------------------x |Timer/Counter| | | x-------------x TGU Configuration in Hardware The TGU provides a step region for user configuration, similar to a flow chart. Each step region consists of three register clusters: 1.Priority Region: Sets the required signals with priority. 2.Condition Region: Defines specific requirements (e.g., signal A reaches three times) and the subsequent action once the requirement is met. 3.Timer/Counter (Optional): Provides timing or counting functionality. Add a new coresight-tgu.yaml file to describe the bindings required to define the TGU in the device trees. Signed-off-by: Songwei Chai <quic_songchai@quicinc.com> --- .../bindings/arm/qcom,coresight-tgu.yaml | 92 +++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-tgu.yaml