@@ -1525,4 +1525,7 @@
#define USB_VENDOR_ID_SIGNOTEC 0x2133
#define USB_DEVICE_ID_SIGNOTEC_VIEWSONIC_PD1011 0x0018
+#define USB_VENDOR_ID_SMARTLINKTECHNOLOGY 0x4c4a
+#define USB_DEVICE_ID_SMARTLINKTECHNOLOGY_4155 0x4155
+
#endif
@@ -904,6 +904,7 @@ static const struct hid_device_id hid_ignore_list[] = {
#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_HP_5MP_CAMERA_5473) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SMARTLINKTECHNOLOGY, USB_DEVICE_ID_SMARTLINKTECHNOLOGY_4155) },
{ }
};
MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an audio device is requested to get specific report id, the following error may occur. [ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd [ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00 [ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device [ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology [ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001 [ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35 [ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2 [ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint [ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) Ignore HID interface. The device is working properly. Signed-off-by: Zhang Heng <zhangheng@kylinos.cn> --- I also tried adding HID_QUIRK_NOGET, but it didn't work. drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+)