diff mbox series

[v3,1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml

Message ID 20250603152245.1068740-1-Frank.Li@nxp.com
State Superseded
Headers show
Series [v3,1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml | expand

Commit Message

Frank Li June 3, 2025, 3:22 p.m. UTC 
Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
imx23/imx28 use dual mode controller (spi and mmc). So default dts node
name use spi instead of mmc. The legacy reason, it use difference
compatible string to distringuish work mode (spi / mmc).

Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi@80010000 (fsl,imx23-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$'

Additional add clocks property.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change in v3
- add clocks in example to fix dt_binding_check warnings/errors.

change in v2
- add clocks to required
- fix typo legancy in commit message
---
 Documentation/devicetree/bindings/mmc/mxs-mmc.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index 32e512a68ed61..df07ea3b81d15 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -17,7 +17,7 @@  description: |
   and the properties used by the mxsmmc driver.
 
 allOf:
-  - $ref: mmc-controller.yaml
+  - $ref: mmc-controller-common.yaml#
 
 properties:
   compatible:
@@ -31,6 +31,9 @@  properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -41,6 +44,7 @@  required:
   - compatible
   - reg
   - interrupts
+  - clocks
   - dmas
   - dma-names
 
@@ -52,6 +56,7 @@  examples:
         compatible = "fsl,imx28-mmc";
         reg = <0x80010000 2000>;
         interrupts = <96>;
+        clocks = <&clks 46>;
         dmas = <&dma_apbh 0>;
         dma-names = "rx-tx";
         bus-width = <8>;