diff mbox series

[v3,2/3] arm64: dts: qcom: x1e80100-hp-x14: remove unused i2c buses

Message ID 20250610-hp-x14-v3-2-35d5b50efae0@oldschoolsolutions.biz
State New
Headers show
Series arm64: dts: qcom: x1e80100-hp-x14: add usb-1-ss1-sbu-mux | expand

Commit Message

Jens Glathe via B4 Relay June 10, 2025, 5:25 p.m. UTC 
From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>

At least from Linux, these buses are not in use. Remove them from the dt.

Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
---
 .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts     | 25 ----------------------
 1 file changed, 25 deletions(-)

Comments

Konrad Dybcio June 11, 2025, 3:10 p.m. UTC | #1 
On 6/10/25 7:25 PM, Jens Glathe via B4 Relay wrote:
> From: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> 
> At least from Linux, these buses are not in use. Remove them from the dt.
> 
> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
> ---

if you're sure there's nothing interesting on them:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 315987f2b62b818059cd1b5dbba28f908c58f00a..3071ed8e192616be797d30d72c21d56b72afc608 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -904,15 +904,6 @@  touchpad@15 {
 	};
 };
 
-&i2c1 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	/* type-c PS8830 Retimer #2 0x8 */
-	/* is active on Windows */
-};
-
 &i2c3 {
 	clock-frequency = <400000>;
 
@@ -970,14 +961,6 @@  retimer_ss0_con_sbu_out: endpoint {
 	};
 };
 
-&i2c4 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	/* is active on Windows */
-};
-
 &i2c5 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -1018,14 +1001,6 @@  touchscreen@10 {
 	};
 };
 
-&i2c9 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	/* is active on Windows */
-};
-
 &lpass_tlmm {
 	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		pins = "gpio12";