@@ -37,6 +37,49 @@ vph_pwr: vph-pwr-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ pmic-glink {
+ compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss_in: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ };
+ };
+
+ };
+ };
+ };
};
&apps_rsc {
@@ -462,7 +505,12 @@ &usb_1 {
};
&usb_1_dwc3 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_hsphy {
@@ -487,3 +535,7 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p91>;
};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com> --- arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 54 ++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-)