diff mbox series

[08/13] lpfc: Ensure HBA_SETUP flag is used only for SLI4 in dev_loss_tmo_callbk

Message ID 20250618192138.124116-9-justintee8345@gmail.com
State New
Headers show
Series Update lpfc to revision 14.4.0.10 | expand

Commit Message

Justin Tee June 18, 2025, 7:21 p.m. UTC 
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns.  Add a phba->sli_rev check for SLI4 mode so that the
SLI3 path can flow through the original dev_loss_tmo worker thread design
to lpfc_dev_loss_tmo_handler instead of early return.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 690eacc5f739..43d246c5c049 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -183,7 +183,8 @@  lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
 
 	/* Don't schedule a worker thread event if the vport is going down. */
 	if (test_bit(FC_UNLOADING, &vport->load_flag) ||
-	    !test_bit(HBA_SETUP, &phba->hba_flag)) {
+	    (phba->sli_rev == LPFC_SLI_REV4 &&
+	    !test_bit(HBA_SETUP, &phba->hba_flag))) {
 
 		spin_lock_irqsave(&ndlp->lock, iflags);
 		ndlp->rport = NULL;