diff mbox

[3/6] arm64: dts: apq8016-sbc: Add Volume Up key device node

Message ID 1483536902-21450-4-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla Jan. 4, 2017, 1:34 p.m. UTC 
From: "Ivan T. Ivanov" <ivan.ivanov@linaro.org>


VOL/ZOOM+ button on DB410c is connected to
SoC GPIO 104. Add support for it.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>

---
 arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 13 +++++++++++++
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          | 18 ++++++++++++++++++
 2 files changed, 31 insertions(+)

-- 
2.10.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index e1e6c6b..185388d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -72,4 +72,17 @@ 
 			bias-disable;
 		};
 	};
+
+	msm_key_volp_n_default: msm_key_volp_n_default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio107";
+		};
+		pinconf {
+			pins = "gpio107";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 5ab277f..d05382a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -15,6 +15,8 @@ 
 #include "pm8916.dtsi"
 #include "apq8016-sbc-soc-pins.dtsi"
 #include "apq8016-sbc-pmic-pins.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
@@ -341,6 +343,22 @@ 
 			};
 		};
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
+
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &wcd_codec {