diff mbox series

[v2] arm64: dts: qcom: sm8550: Correct the min/max voltages for vreg_l6n_3p3

Message ID 20250620-sm8550-correct-vreg_l6n_3p3-vol-v2-1-b397f3e91d7b@oss.qualcomm.com
State New
Headers show
Series [v2] arm64: dts: qcom: sm8550: Correct the min/max voltages for vreg_l6n_3p3 | expand

Commit Message

Kamal Wadhwa June 20, 2025, 3:29 p.m. UTC 
Voltage regulator 'vreg_l6n_3p3' max-microvolt prop is currently
configured at 3304000uV in different sm8550 board files. However this
is not a valid voltage value for 'pmic5_pldo502ln' type voltage
regulators.

Check below the max value(3200mV) in the regulator summary for min/max
used as 2800mV/3304mV in DT:-

logs:

[    0.294781] vreg_l6n_3p3: Setting 2800000-3304000uV

regulator summary:

regulator     use open bypass  opmode   voltage current  min     max
---------------------------------------------------------------------
..
vreg_l6n_3p3   0    0    0     normal   2800mV   0mA  2800mV  3200mV
..

Correct the min/max value to 3200000uV, as that is the closest valid
value to 3.3V and Hardware team has also confirmed that its good to
support the consumers(camera sensors) of this regulator.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
---
Changes from v1:
- Updated voltage settings with min = max = 3.2v, which is the closest
  valid value to 3.3v, as suggested by Bjorn Anderrson.
- Reverted the phandle name change(name unchanged now)
---
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts         | 4 ++--
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts         | 4 ++--
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts         | 4 ++--
 arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)


---
base-commit: 393d0c54cae31317deaa9043320c5fd9454deabc
change-id: 20250620-sm8550-correct-vreg_l6n_3p3-vol-a1606e568154

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 29bc1ddfc7b25f203c9f3b530610e45c44ae4fb2..4d13d9bdd53194d655957f147f9d78cb4cc9abbd 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -859,8 +859,8 @@  vreg_l5n_1p8: ldo5 {
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 5648ab60ba4c4bfaf5baa289969898277ee57cef..e207bb38d82cf7a0ab896e76d5a184a44b4a3f71 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -626,8 +626,8 @@  vreg_l5n_1p8: ldo5 {
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 3a6cb279130489168f8d20a6e27808647debdb41..5c6f73291da185d39d8bd7cf505727d87271bf30 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -702,8 +702,8 @@  vreg_l5n_1p8: ldo5 {
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index 7d29a57a2b540708fa88fb59e821406f400a3174..b4ef40ae2cd956d2c0a1e46d6428aaa6e5d9c4ee 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -487,8 +487,8 @@  vreg_l5n_1p8: ldo5 {
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};