diff mbox series

[v3,3/7] dt-bindings: gpio: gpio-cdns: convert to YAML

Message ID 20250623-axiado-ax3000-soc-and-evaluation-board-support-v3-3-b3e66a7491f5@axiado.com
State New
Headers show
Series Axiado AX3000 SoC and Evaluation Board Support | expand

Commit Message

Harshit Shah June 23, 2025, 5:28 p.m. UTC 
Convert Cadence family GPIO controller bindings to DT schema.

Signed-off-by: Harshit Shah <hshah@axiado.com>
---
 .../devicetree/bindings/gpio/cdns,gpio.txt         | 43 ------------
 .../devicetree/bindings/gpio/cdns,gpio.yaml        | 80 ++++++++++++++++++++++
 2 files changed, 80 insertions(+), 43 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
deleted file mode 100644
index 706ef00f5c64951bb29c79a5541db4397e8b2733..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
+++ /dev/null
@@ -1,43 +0,0 @@ 
-Cadence GPIO controller bindings
-
-Required properties:
-- compatible: should be "cdns,gpio-r1p02".
-- reg: the register base address and size.
-- #gpio-cells: should be 2.
-	* first cell is the GPIO number.
-	* second cell specifies the GPIO flags, as defined in
-		<dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
-		and GPIO_ACTIVE_LOW flags are supported.
-- gpio-controller: marks the device as a GPIO controller.
-- clocks: should contain one entry referencing the peripheral clock driving
-	the GPIO controller.
-
-Optional properties:
-- ngpios: integer number of gpio lines supported by this controller, up to 32.
-- interrupts: interrupt specifier for the controllers interrupt.
-- interrupt-controller: marks the device as an interrupt controller. When
-	defined, interrupts, interrupt-parent and #interrupt-cells
-	are required.
-- interrupt-cells: should be 2.
-	* first cell is the GPIO number you want to use as an IRQ source.
-	* second cell specifies the IRQ type, as defined in
-		<dt-bindings/interrupt-controller/irq.h>.
-		Currently only level sensitive IRQs are supported.
-
-
-Example:
-	gpio0: gpio-controller@fd060000 {
-		compatible = "cdns,gpio-r1p02";
-		reg =<0xfd060000 0x1000>;
-
-		clocks = <&gpio_clk>;
-
-		interrupt-parent = <&gic>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..265bd62cb0887a860391d56b3154dcd8416c5d2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence GPIO Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    const: cdns,gpio-r1p02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+    description: Number of GPIO lines supported, maximum 32.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number.
+      - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>,
+        only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number used as IRQ.
+      - Second cell is the trigger type, as defined in
+        <dt-bindings/interrupt-controller/irq.h>.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required: [interrupt-controller]
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio-controller@fd060000 {
+        compatible = "cdns,gpio-r1p02";
+        reg = <0xfd060000 0x1000>;
+        clocks = <&gpio_clk>;
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };