new file mode 100644
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,bq25703a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BQ25703A Charger Manager/Buck/Boost Converter
+
+maintainers:
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: /schemas/power/supply/power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,bq25703a
+
+ reg:
+ const: 0x6b
+
+ interrupts:
+ maxItems: 1
+
+ power-supplies: true
+
+ monitored-battery:
+ description:
+ The phandle for a simple-battery connected to this gauge.
+ A minimum of constant-charge-current-max-microamp,
+ constant-charge-voltage-max-microvolt, and
+ voltage-min-design-microvolt are required.
+
+ input-current-limit-microamp:
+ description:
+ Maximum total input current allowed used for both charging and
+ powering the device.
+ minimum: 50000
+ maximum: 6400000
+ default: 3250000
+
+ regulators:
+ type: object
+ additionalProperties: false
+ description:
+ Boost converter regulator output of bq257xx.
+
+ properties:
+ "usb-otg-vbus":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml
+
+ properties:
+ regulator-name: true
+ regulator-min-microamp:
+ minimum: 0
+ maximum: 6350000
+ regulator-max-microamp:
+ minimum: 0
+ maximum: 6350000
+ regulator-min-microvolt:
+ minimum: 4480000
+ maximum: 20800000
+ regulator-max-microvolt:
+ minimum: 4480000
+ maximum: 20800000
+ enable-gpios:
+ description:
+ The BQ25703 may require both a register write and a GPIO
+ toggle to enable the boost regulator.
+
+ additionalProperties: false
+
+ required:
+ - regulator-name
+ - regulator-min-microamp
+ - regulator-max-microamp
+ - regulator-min-microvolt
+ - regulator-max-microvolt
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - input-current-limit-microamp
+ - monitored-battery
+ - power-supplies
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25703: charger@6b {
+ compatible = "ti,bq25703a";
+ reg = <0x6b>;
+ input-current-limit-microamp = <5000000>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+ monitored-battery = <&battery>;
+ power-supplies = <&fusb302>;
+
+ regulators {
+ usb_otg_vbus: usb-otg-vbus {
+ enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ regulator-max-microamp = <960000>;
+ regulator-max-microvolt = <5088000>;
+ regulator-min-microamp = <512000>;
+ regulator-min-microvolt = <4992000>;
+ regulator-name = "usb_otg_vbus";
+ };
+ };
+ };
+ };
+
+...