| Message ID | 20170106215733.41637-8-s-anna@ti.com |
|---|---|
| State | Accepted |
| Commit | 82d76b6a203c2b36629969d177d456104f5d3451 |
| Headers | show |
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index edc08de4e196..b58015737a35 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -210,6 +210,10 @@ ranges = <0x0 0x0c000000 0x200000>; #address-cells = <1>; #size-cells = <1>; + + sram-bm@1f8000 { + reg = <0x001f8000 0x8000>; + }; }; dspgpio0: keystone_dsp_gpio@02620240 {
The Keystone 2 boot monitor uses 32 KB of the MSM RAM @ 0x0c1f8000 on 66AK2L SoCs, so add a reserved child node for the same. This address is aligned to the values used within the latest boot monitor firmware [1] as of commit cf8b431e8b3b ("soc: Move load address to end of MSMC"). [1] git://git.ti.com/processor-firmware/ks2-boot-monitor.git Signed-off-by: Suman Anna <s-anna@ti.com> --- arch/arm/boot/dts/keystone-k2l.dtsi | 4 ++++ 1 file changed, 4 insertions(+) -- 2.10.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel